Jump to content
SAU Community

Thought I'd Share A Great Experience Using Micolour!


Recommended Posts

Hi All,

I just thought I'd share my awesome experience with Michael / MiColour after a terrible 4 months dealing with my insurance company.

Basically, I got hit with the Xmas day hail on my R33. After making a claim with my insurer, inspection after inspection, I was getting nowhere. Michael went in to bat for me and after 4 long, painful months (where I got to the point that I was over the car and my insurance company) Michael got the final insurance inspection done and my car was approved for repair.

So after a few weeks, the car was ready. Pulling into MiColour, I was blown away!!! Closer inspection revealed the paint was unbelievably perfect! All the dings from the hail gone! The colour is awesome just how Nissan intended it to be. I also had Michael fix the front bar and it looks fantastic. Michael even fixed some damage that must have been done when the car was in Japan and re-aligned my boot!

If you need some paint work done, MiColour should be at the top of your list. Most body shops want your car in and out, at the expense of workmanship. But Michael has pride in the work he does. I can't express how happy I am and have a reinvigorated passion for my car!

After a disastrous 4 months, all is now great! I will post some pics up in the next day or so.

Shop details are in my sig...

good to hear and well done

how bad was the hail damage?

how much was the car insured for and what was the repair bill???

my 97 gtst was insured for 12k and just cars didnt even bother getting a quote for my car - total loss declared within 5 minutes of looking at it

Ha! I was in there last week and this weekend ( I had a small love tap 2 weeks ago on punt road) now that I am with Shannons they just asked where do you want to take it. said Micolour straight away.

I'm guessing yours was the black one? I saw the bonnet and I said to michael I couldn't believe it had hail damage on it!

He truely is a top bloke, always putting clients first. I dropped my car off there on Saturday for an assesment today -already been done and he is currently working on it, hopefully have it back on Wednesday night. Crazy good service.

Good stuff mate, I'm sure i'll be as happy as you.

When I get it back I was going to ask if I could have a checky peek at ur 31 Ash :)

Mick is a champion. Cast your eye on my now white 32 shell while your down there Adam if you haven't been already - I get goosebumps thinking about it.

Other panel shops might assure you this and that will be done properly but don't always come through with the goods. You know you can trust Mick will deliver on his promise and he's a good bloke to boot. Couldn't count the hours he has spent taking me through all the work he has done on my thing.

  • 2 weeks later...

Finally took a couple of pics...

The roof and bonnet had some major dings... The front bar was pretty much hacked for the IC and had plenty of driveway damage...

IMG 0998

IMG 0996

IMG 0993

When the weather clears up, i'll try and take some more shots...

Wow, nice result! Certainly reasssuring given that I'm getting Mick to fix some minor damage on our Subaru (no sn1ggering up the back). If all goes well he'll most likely be painting the Skyline too, if it turns out as well as yours I'll be stoked! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...