Jump to content
SAU Community

Recommended Posts

Well, Ill just jump in and say this before some dickhead says it..

"Just do a line locker bro .. just do a burnout .. der"

I know this isnt the answer your looking for, so the only other way that i know of is..

Get your car up on a hoist, and then attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..

if the other wheel spins and is kinda joly/grippy this means your LSD is on its way out .. proberly a busted side arm or teeth being chipped off

(Note: Exercise only practiced on race tracks)

Naturally.:rofl:

Yeah, the viscous LSD always seemed to have a mind of it's own as to how many wheels it would spin eh, but we shouldn't be using these fine Nissans just for smokeshows now, should we? :D

But you're right, the question was to check for an LSD, and jacking it up and spinning the wheels is the best way.

Perhaps there's a cue to the internals by looking at the back of the diff housing?

But you're right, the question was to check for an LSD, and jacking it up and spinning the wheels is the best way.

yes that's the best way.

attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..

That doesnt make sense.

If you spin one wheel the other wheel will spin in the same direction if it's LSD.

If it wasnt originally lsd one wheel will spin in the opposite direction to the other.(single spinner)

However you'll find that most skylines come with lsd.

If your spinning one wheel and the other is spinning in the same direction but not at the same speed it might not be working properly.

if you wanna find out if your car has LSD then you could give your VIN to an authorise Nissan Japan service center (or any Nissan Dealer in australia) or infact anyone with the NSSAN Japan FAST system, they could plug it in and let you know if your car got one from the factory.

When I first got my car, I got it serviced and the dude goes "wow you have an LSD on yours". And I was like "huh? don't they all have em?" (coz I had a viscous LSD (2) on my ex-drift 180sx). He informed me that not all R32s came with an LSD, so I checked up on mine at my local nissan dealer n found out that mine had a factory LSD (dunno if its 1 or 1.5), and not only that it was a limited edition V Selection 2 which was given the trimmings of a GTR and LSD n HICAS n strutbars n all the goodies lol

Uhh.. i Thats exactly what i just said ... wasnt it?

Edit:..

Quote:

attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..  

That doesnt make sense.

If you spin one wheel the other wheel will spin in the same direction if it's LSD.

If it wasnt originally lsd one wheel will spin in the opposite direction to the other.(single spinner)

However you'll find that most skylines come with lsd.

If your spinning one wheel and the other is spinning in the same direction but not at the same speed it might not be working properly.

Thats pretty much the exact same thing i just said .. how does it 'not make sense'

lol now youve got me confused :D

The ECR33 (R33 GTS25t) has a factory LSD (8/93 onward).

From I think 95 onwards there was a factory option for an Active LSD which is obviously better than the standard LSD in that there is some sensors and a computer to control the way the LSD works.

The easiest way to tell whether you have active LSD is to look on the dash and if there is a SLIP or A-LSD indicator in the middle you have A-LSD.

Very few cars have the Active LSD so don't get your hopes up.

  • 2 weeks later...

Ok then.....

attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..

like I said before an lsd has both wheels spinning in the same direction at the same rate.

Single spinners also spin at the same rate but in opposite directions.

Hope that clears things up. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...