Jump to content
SAU Community

Recommended Posts

wish i had done that with my 33 turbo.

ordered a Hypergear from melbourne, got boned on the installation costs and now I have a giant laggy as F@$# turbo that cost me a fortune and isnt that much faster around the track than NA Micras etc

research, research, research.

you cant do too much!

wish i had done that with my 33 turbo.

ordered a Hypergear from melbourne, got boned on the installation costs and now I have a giant laggy as F@$# turbo that cost me a fortune and isnt that much faster around the track than NA Micras etc

research, research, research.

you cant do too much!

Really? Laggy?

My high flow was laggy and underpowered IMO.... Its why i went all out to the combo i have now (Well will have in a week or so when its finished)....

PAT! yours is also a t4 flanged turbo, not a t3, its some sort of other hypergear turbo, def does not have anything original on it :D

your boost kicks in at 5k rpm anyways. but from there on, it pulls like a train.

BTW, to OP, to upgrade your turbo, you might want to invest in a clutch as well.

Edited by Bronx

hamiltonau: Type B rear housing for G3 is released, you can send it back for free upgrade. Also you the tune in it was bad and pinning loud. I hope you didn't track it like that. Come pass when you are in Melbourne next.

Ya I have done done the following modes HKS electronic turbo booster, HKS intercooler, BC RC coils, Pod filter, Fuel Injector 550, .7 spark plugs, AFM, Apexi ECU, 3" inch HKS exhaust ..... should I stick with 550 or move to 650cc … anyway can u pls post ur mods

They are not bolt on. GTR/GTS-t = incompatible due to flange differences

Yeah, you're right.

Considering he wanted an aftermarket turbo / kit, I would have assumed things will have to change.

So yes, he'd have to modify the exhaust manifold / flange.

back to questions

what is your recommendation Skyline(OO) to achieve 550HP?

Lol, build your engine!

Why you being lazy? GO to the RB25 Dyno thread.

Look what I found....

R33 GTS-T Series 2

GT3076 IW .82

256 Cams

Supporting mods etc...

Caltex E-flex E85

Nismo 740cc injectors

Bosch 040 fuel pump

Still using the standard airbox (ported) and snorkel

349rwkw on 19psi spikes to 21psi

post-59604-0-10782100-1331083458_thumb.jpg

post-59604-0-10674100-1331083485_thumb.jpg

RB25DET S1

CP forged piston kit

ACL bearings

Cometic Gaskets

HKS 264 cams

HKS GT3037S-56T

HKS ext. Wastegate 50mm

Splitfire coilpacks

Nismo 740 injectors

Greddy Profec B

Z32 AFM

APEXi Power FC

Blitz NÜR Spec exhaust

Unfortunatelly we reached the MAHA LPS 3000 dyno limits, and it tilt down at 5700rpm.... sad.gif

1.6 bar

471 HP @ 5700

579 Nm @ 5200

As It seen on graphs those HP numbers are not the peak numbers, We estaminated 500+HPR33_GT3037_23PSI_.jpg

back to questions

what is your recommendation Skyline(OO) to achieve 550HP?

A lot of work :laugh:

Read Hadouken's post as it's pretty much spot on.

But for starters, the turbo kit you GF bought for you off eBay, as it states, it is a GT3582R.

Garrett claims that turbo can produce a power range between 400 to 600 HP.

So you'd use that turbo and then you need the supporting mods to handle the power.

I see that you have done Injectors / ECU / AFM / Exhaust / Air Intake / Intercooler / Spark Plugs / Suspension, now you need the rest to go with it... Re-read Hadouken's post.

Now can your Gearbox / Clutch / Brakes / Tyres handle the power? They will need upgrading.

Is 550HP streetable? :)

  • 2 weeks later...

Hey guys .. I dnt know if I should open a new topic... I was away for few days just got back to melbourne...

I had a word with workshop ppl ... He also recommended the same turbos as you guys.. but he also said no to manual transmission.. as my car is Semi Auto .. I think its Multitronic ... he said around 10% power is been reduced coz of transmission

do you guys recommend it or should I just stay with the turbo upgrade. ? ATM my car is pretty sweet ... i mean transmission wise and engine wise .. i do service every 3000 and keep it clean drive carefully ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...