Jump to content
SAU Community

Lost Car Keys - Advice Please

asitag
 Share

Recommended Posts

asitag Collaborator

asitag

Posted
Posted

Hey guys,

This is not related to my skyline, but the advice will probably be the same.

My wife has lost her keys to her '01 liberty (including spare key), and Subaru quoted $400+ for a replacement set.

Is there a way to get a locksmith to cut a new key set instead of spending such a ridiculous amount of cash to get a new set from the stealership?

We don't care about the immobiliser etc. Just need the stupid thing to start!

any advice?

Link to comment
https://www.sau.com.au/forums/topic/401210-lost-car-keys-advice-please/
Share on other sites
Nightcrawler Grand Master

Nightcrawler

Posted
Posted

^^ yeah right - if you read tip 6 of the article you linked to, most vehicles cannot have a new immobiliser fobs made (you need a dealer to do this) .... so have a tow truck ready - yeah right. So suddenly the $400 from the dealership seems cheap. They can probably make a new key and immobiliser fob from the VIN number of the vehicle, courier it to the OP and they are away.

And Kylie have you ever had the exact thing the OP is describing happen to you? Well I HAVE - so it seems you are the idiot giving out bad advice based on an American article you found on the internet. Useful. Not.

And I take it from your long history of warnings that your outspokenness has seen you undone before. So how about you stop talking about things you know nothing of.

If the OP followed your advice there is every chance that they would have to pay for a locksmith callout, non-genuine key to be made, unsuccessful non-genuine fob to be made, tow truck to the dealer, then the actual cost of the new key and fob. As I said above, this makes $400 seem very cheap.

Just go genuine. Yes stealerships suck, but to get a genuine key and fob and have 100% satisfaction the first time round, you would be foolish to call out a locksmith.

sonicii Veteran

sonicii

Posted
Posted

I agree with Nightcrawler. If you still had a working key, most good locksmiths can cut a new key and clone the immobiliser chip. But without a key or a chip, you are probably left with getting ripped of by the dealer.. assuming the liberty's have a chip in the key head..

Lucky it isn't a toyota.. some of them need to have the whole immobiliser system replaced if you don't have at least 1 working key on hand.

IMPORTD Grand Master

IMPORTD

Posted
Posted

err the op wasn't worried about the immobiliser for now, just a key, and if he calls around for pricing he most probably will save some coin but I guess that depends if he needs to tow his car or not.

The site offers advice and australian sites to visit. I didn't see anything to say it was American?

That statement about giving advice must have hit a nerve hey, but it was a general statement to anyone wanting to give advice. My advice was pretty clear, research your options. Don't just take someones 'word' for it.

You can hit below the belt and bring up private confidential information that shouldn't be aired on here....just shows how mature and professional you take your moderating position.

Vimana Enthusiast

Vimana

Posted
Posted

This car still has a transponder style immobiliser and will need a genuine key to start it. No locksmith can make a new key and code the transponder without the original. The best they will be able to do is unlock the door.

The reason it costs so much to do at the dealer is because the will need to fit a new body control module with matched key, not just code a new key.

I have a $15,000 scanner that can code most keys and do all OBDII stuff, but i cant code a new key unless i have the old.

Nightcrawler is correct in what he has said.

PS.... this is what i do for a living.

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

This car still has a transponder style immobiliser and will need a genuine key to start it. No locksmith can make a new key and code the transponder without the original. The best they will be able to do is unlock the door.

The reason it costs so much to do at the dealer is because the will need to fit a new body control module with matched key, not just code a new key.

I have a $15,000 scanner that can code most keys and do all OBDII stuff, but i cant code a new key unless i have the old.

Nightcrawler is correct in what he has said.

PS.... this is what i do for a living.

and I agree. same thing goes with most of the newer cars. unless you have the pin code OR a working key dealer is the only way to do it. doesnt matter if you think its expensive or not.

VIM,

carmen or hannotech?

Alkatraz Rising Star

Alkatraz

Posted
Posted (edited)

I would be guessing that the keys for most manufacturers would simply come out of China and then be programmed by the dealers. Any chance of finding a blank for that particular model, having it sent to you and then going to the dealer to program it? The blank would probably cost $2 but based on the amount of time you would spend f'ing around doing this, it might be easier paying the $400.

Have a look at your home and contents policy (provided you have one), there might be a clause in there that covers something like this. Then just weigh up the $400 vs. your excess and possible premium increase on renewal. Some car insurance's will also cover this, the excess on the car insurance is generally higher though but may be worth a phone call to find out.

Edited by Alkatraz
Vimana Enthusiast

Vimana

Posted
Posted

and I agree. same thing goes with most of the newer cars. unless you have the pin code OR a working key dealer is the only way to do it. doesnt matter if you think its expensive or not.

VIM,

carmen or hannotech?

carmen.... i have the older one with the built in dual trace sillyscope and the newer touch screen blue one... sorry cant remember model names, but you get the idea. Also have all the european add ons.

sonicii Veteran

sonicii

Posted
Posted

The reason it costs so much to do at the dealer is because the will need to fit a new body control module with matched key, not just code a new key.

Is that true with subaru too? I am fairly sure a Nissan dealer can reprogram a new chip to NATS without needing an existing coded chip?? After all, when they enter the program mode, it erases all existing chips anyway.

sonicii Veteran

sonicii

Posted
Posted

I would be guessing that the keys for most manufacturers would simply come out of China and then be programmed by the dealers. Any chance of finding a blank for that particular model, having it sent to you and then going to the dealer to program it? The blank would probably cost $2 but based on the amount of time you would spend f'ing around doing this, it might be easier paying the $400.

Normally the keys are supplied with an existing unique code burnt into the chip, the car's immobiliser needs to be programmed to accept this code.

I purchased a chipped key for my J31 from hong kong, $25 for the key (free postage), about $10 to get it cut and $33 for nissan to program NATS to accept it. (which also cleared the old lost key) much cheaper than the $250+ that Nissan wanted to charge to do the same thing.

GTR-N1 Grand Master

GTR-N1

Posted
Posted

Hey guys,

This is not related to my skyline, but the advice will probably be the same.

My wife has lost her keys to her '01 liberty (including spare key), and Subaru quoted $400+ for a replacement set.

Is there a way to get a locksmith to cut a new key set instead of spending such a ridiculous amount of cash to get a new set from the stealership?

We don't care about the immobiliser etc. Just need the stupid thing to start!

any advice?

Has wifie lost other things besides 2-3 keys? I suspect so!

Short term memory? Cognition issues? PM me if she needs to have that tested.

Otherwise, if she thinks hypnosis might help her find at least one, as an SAUer, I'm happy to do it for mates rates (if I have a gap).

Thoughts?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      Why am I hitting a power wall with my stroked RB25?

      By r32-25t · Posted

      Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Kelford 246-A2. 262in/272ex. 
    • Adam_ECR33
      Hello sau 👋

      By Adam_ECR33 · Posted

      Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
×
×
  • Create New...