Don Dada Posted June 11, 2012 Share Posted June 11, 2012 (edited) Edit>>> Not sure which model you have but you can check here. http://www.tialsport.com/techincal.htm Edited June 11, 2012 by Don Dada Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6394736 Share on other sites More sharing options...
AngryRB Posted June 12, 2012 Author Share Posted June 12, 2012 ok i changed the duty on the boost controller, was testing it in 3rd gear, crusing on 3000rpm and then flooring it to 4000rpm, managed to get upto 1.1bar, i think this must be getting close to normal? Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6396454 Share on other sites More sharing options...
AngryRB Posted August 8, 2012 Author Share Posted August 8, 2012 (edited) im back baby!!! lol.... just tuned with some flex fuel today and i think the gtx has earned its place under the bonnet finally... 20psi by 4000rpm, thats what i was after so happy finally, idle is smooth too now added upto 6degree of timing all over the map and was mind boggling how good the flex fuel has made the setup.. even tuner was amazed.. on the drive back to the shop it easily fried 2nd , more like a burnout in second and third pulled so hard it was getting frightening lol.... 320kw with flex fuel on 16psi , i think that might makes the gtx not too shabby...it spikes early but it is 16psi that makes that power unless im reading it wrong. It could have done bit more but with stock bottem end was not wanting to lean on things too much.. so im really happy with this result, no more than 20 knock on the power fc so is very safe too... anyway, what do you guys think.. is this dyno respectable? do you think this dyno justifies the gtx or would the gt of been even better??? Edited August 8, 2012 by SliverS2 Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6478864 Share on other sites More sharing options...
SS8_Gohan Posted August 8, 2012 Share Posted August 8, 2012 which fuel? United or Caltex? flex-fuel is a setup allowing you to use any mixture of E85/unleaded - E-Flex is caltex's high percentage ethanol fuel Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6478871 Share on other sites More sharing options...
AngryRB Posted August 8, 2012 Author Share Posted August 8, 2012 it was from caltex so ill just fill up from caltex , theres 7 servo's within 30min drive so hopefully they are all similar ethanol content, tuner said to keep an eye on the knock level and he can adjust the mixture if theres any knock issues, so far its very low knock... dam this fuel smells good.. mm Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6478884 Share on other sites More sharing options...
GTScotT Posted August 8, 2012 Share Posted August 8, 2012 320 @ 16psi is nice screw 25psi into that bastard and see what it will do. Im guessing 350 is not out of the question Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6478890 Share on other sites More sharing options...
AngryRB Posted August 8, 2012 Author Share Posted August 8, 2012 320 @ 16psi is nice screw 25psi into that bastard and see what it will do. Im guessing 350 is not out of the question yeah i know, ill leave that to someone else lol... i just wanna enjoy driving it for a while, only been driven a few times in the last 8months.. im still giggling at the drive home from the dyno... lol .. this is how these cars should be.. frying the tyres up in second easy.. Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6478959 Share on other sites More sharing options...
Mitcho_7 Posted August 8, 2012 Share Posted August 8, 2012 are you going to only run 16psi? I think at least 18-19psi would still be safe Good to see you are happy with it though! Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479052 Share on other sites More sharing options...
AngryRB Posted August 8, 2012 Author Share Posted August 8, 2012 yeah i think 320kw with stock engine is enough for me, and 16psi must be very safe so it should last a while hopefully... its 20psi in the midrange so im not missing out on too much i dont think.. very happy with it yeah... even idles smoother now and not jerky, very smooth and comes on boost alot better... Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479072 Share on other sites More sharing options...
usmair Posted August 8, 2012 Share Posted August 8, 2012 seem these babies crack 370kw on an sr20 stock motor... do it.. wind her up Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479283 Share on other sites More sharing options...
wolverine Posted August 8, 2012 Share Posted August 8, 2012 anyway, what do you guys think.. is this dyno respectable? do you think this dyno justifies the gtx or would the gt of been even better??? It looks pretty good now and it is great to hear you are happy with it. It's great when you finally get your car to its potential. It sounds like some suspension changes and tyres are in order. I reckon a GT would have been a better performer by coming on earlier and would easily make that power level with E85. I have my old GT3040 sitting in the garage and they seem to be pretty much the same as a GTX3076 but it just needs to find a home and some E85 to prove or disprove it. Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479451 Share on other sites More sharing options...
scotty nm35 Posted August 8, 2012 Share Posted August 8, 2012 At least the GTX compressor would be in the middle of it's efficiency, plenty more in it though. I got 350kw at 25psi to give you some idea of it's potential. I wouldn't be surprised if there was 400kw in it on a perfect setup. Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479461 Share on other sites More sharing options...
AngryRB Posted August 8, 2012 Author Share Posted August 8, 2012 thanks for the replies, It would definitely hit atleast 350kw i think, but i think for my budget and for a street car it is at a point of being just a nice package, im not sure bout fitting better tyres yet, seems like too much fun to fry them up at will, i guess if you were being picky and wanted perfection, the gt would of shifted the power band to the left a bit but its done now.. when i bought the car with 200kw, it sounded doughy and lazy like alot of them you see on the road, now it clearly sounds unique and has a strong and angry note to it.. even just light throttle letting the revs climb , it sounds like dog flarring its teeth... Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479669 Share on other sites More sharing options...
ARTZ Posted August 8, 2012 Share Posted August 8, 2012 Nice work Mark...after all my stuffing around I wish I had of just gone with an internal gated Gtx... Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479692 Share on other sites More sharing options...
AngryRB Posted August 8, 2012 Author Share Posted August 8, 2012 thanks mate.. would of been a bit lost without your DIY top feed thread... dont know if gtx is the way to go though, lol... that extra 500rpm or so response that a gt might give would be a good improvement.. Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479715 Share on other sites More sharing options...
scotty nm35 Posted August 9, 2012 Share Posted August 9, 2012 There is no 500rpm better response unless you put a .63 housing on it. (or a split pulse .82 setup) 20psi by 4000 is about what they both make. (GTX and GT .82) Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479743 Share on other sites More sharing options...
Mitcho_7 Posted August 9, 2012 Share Posted August 9, 2012 So it's hitting full boost by 4000rpm. That's pretty damn good, especially when you are running the stock manifold and the gate off the turbine housing aren't you? what size exhaust are you running? Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479811 Share on other sites More sharing options...
ARTZ Posted August 9, 2012 Share Posted August 9, 2012 Its internal gate that's the beauty..the amount. Of messin about I have gone through to make my kando fit and its struggling after 300kws..this is a much easier option.. But hey, I like to keep my local fabricators busy. Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479850 Share on other sites More sharing options...
Mitcho_7 Posted August 9, 2012 Share Posted August 9, 2012 really? I thought for sure it was an external gate on stock manifold... Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479883 Share on other sites More sharing options...
ARTZ Posted August 9, 2012 Share Posted August 9, 2012 Either way, I gaurentee it would be making much the same with IG.. Link to comment https://www.sau.com.au/forums/topic/401479-opinions-on-my-tune-gtx3076/page/3/#findComment-6479896 Share on other sites More sharing options...
.jpg.f12de7f691c43c4db5bb04844858606e.thumb.jpg.80a0b649e77f000c77aa2fbe73bbe729.jpg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now