Jump to content
SAU Community

Want To Change Diff Gear To 4.3....what Diff Do I Need To Buy?

NYTSKY
 Share

Recommended Posts

ima_slap_joO Collaborator

ima_slap_joO

Posted
Posted

Hi all,

Want to change my diff gear to 4.3, what diff do I need to buy to rob the gear out of? :)

Needs to fit an R33 GTST diff.

`

Have you been in an R33 with the conversion done? I had the longer ratio in my r32, first and second just seemed much better to drive, after swapping back to the 4.3 the first and second are pretty short, and wheel spin can be a real

problem, although I can drive to work in fifth doing 60 at 1500 rpm so that is handy for fuel. Have to admit though the 4.1's just felt better, IMHO. Good luck though. Oh, and I got the 4.3 diff from SSS for around $400 which was fantastic.

GTSBoy Grand Master

GTSBoy

Posted
Posted

I also went the otehr way. From 4.3 behind RB20 in R32, to 4.1 behind 25Neo in same car.

MUCH MUCH better. Would not consider 4.1 behind RB20, but would only consider 4.3 behind RB25 for dedicated drag car.

By the way....the 4.3 gears from normal auto GTSTs are not the same as the GTS4 gears. The GTS4 are 4.375. Even better for dedicated drag car, but damn silly on the road.

NYTSKY Grand Master

NYTSKY

Posted
  • Author
Posted

Doing some "testing" the other night and im finding that I need to be at a higher rpm at a slower road speed, so first step is a higher final gear, second step it different box ratios.

Thanks for the imput guys! Stock auto GTST gear it is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
    • GTSBoy
      Speed Sensor replacement

      By GTSBoy · Posted

      Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...