Jump to content
SAU Community

Recommended Posts

Is nismo bro.

Also the colour of those would match my car perfectly.

It's nismo...

nismo....

yeah but you still gonna be disappointed.............................

does not fit R32/33 GTR only R34/R35

I kinda forgot to mention that lol

  • Like 1

alright here is something that will no doubt catch on for all you nismo aficionado

img_1170_zpsdv8e90x5.jpg

img_1175_zpsllirigwd.jpg

img_1172.thumbnail_zpsr5ls96js.jpg

nismo blue side mirrors

get your wallets out lol

here is the link

http://www.rhdjapan.com/nismo-multi-function-blue-mirror-set-skyline-r34-bnr34.html

nismo make some stupid shit but this takes the cake
  • Like 2
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...

hello fellas and ladies. New here just got my first r32 GTR (I'm american) but I have a rb25 240sx also. I am a nismo freak myself so I figured I would share a few of my items. Now some of these items will for sure be going onto my GTR when it arrives in the states. Don't worry, the GTR will be getting a plethora of nismo goods also. It is pretty stock and super clean (80,000 km) , but has nismo floor mats, nismo shift knob, nismo air filter and nismo front/rear arms on it already.

Jyll95W.jpg

gh9uwuP.jpg

au62n8N.jpg

fnTM3xB.jpg

ng4KAI5.jpg

4opqNEM.jpg

fo7yEat.jpg

s13 floor mat

YjRQQqk.jpg

0mYFV7a.jpg

f5JkV1b.jpg

BNIB s13 silvia rear strut bar (pretty rare from what I hear)

eQFg9ce.jpg

SvraiPV.jpg

Nismo Recaro SR-II recliners

hHXPad1.jpg

GT500 race harness

sk5ZmOr.jpg

eiN8VLv.jpg

9G51Omj.jpg

XNEpqKP.jpg

SMGIDwp.jpg

UQEl2EZ.jpg

zm2S9F5.jpg

s4qWRx1.jpg

FyHv3Ft.jpg

lppEvy6.jpg

Old School willans 2inch cam-lock style harness for street.

YcllTIZ.jpg

nwua4Ad.jpg

yellow fashion lighter, way more rare than the reds

UWUArKL.jpg

0YLyykx.jpg

HhualiB.jpg

chNyo7J.jpg

PHz3Wcd.jpg

Edited by JTCC
  • Like 3

hello fellas and ladies. New here just got my first r32 GTR (I'm american) but I have a rb25 240sx also. I am a nismo freak myself so I figured I would share a few of my items. Now some of these items will for sure be going onto my GTR when it arrives in the states. Don't worry, the GTR will be getting a plethora of nismo goods also. It is pretty stock and super clean (80,000 km) , but has nismo floor mats, nismo shift knob, nismo air filter and nismo front/rear arms on it already.

Jyll95W.jpg

gh9uwuP.jpg

au62n8N.jpg

fnTM3xB.jpg

ng4KAI5.jpg

4opqNEM.jpg

fo7yEat.jpg

s13 floor mat

YjRQQqk.jpg

0mYFV7a.jpg

f5JkV1b.jpg

BNIB s13 silvia rear strut bar (pretty rare from what I hear)

eQFg9ce.jpg

SvraiPV.jpg

Nismo Recaro SR-II recliners

hHXPad1.jpg

GT500 race harness

sk5ZmOr.jpg

eiN8VLv.jpg

9G51Omj.jpg

XNEpqKP.jpg

SMGIDwp.jpg

UQEl2EZ.jpg

zm2S9F5.jpg

s4qWRx1.jpg

FyHv3Ft.jpg

lppEvy6.jpg

Old School willans 2inch cam-lock style harness for street.

YcllTIZ.jpg

nwua4Ad.jpg

yellow fashion lighter, way more rare than the reds

UWUArKL.jpg

0YLyykx.jpg

HhualiB.jpg

chNyo7J.jpg

PHz3Wcd.jpg

post-5053-14282136468411_thumb.jpg
  • Like 4

Great display JTCC! :thumbsup:

Here's a request to you guys.

I have the rad cap in Pic 1 (compliments of luke gtr)

Terry-167_zpsgvdzqs4b.jpg

And I'd like to get it back to its original look and even better than Pic 2

images_zpsregyvfnr.jpg

Mine is still holding pressure but once refurbished, it will be for static display only and not for road use.

Any suggestions?

So far, walkaou (aka Justin) suggested that...

a) scanning and digitalisation work needs to be done, and then...

b) a new sticker which won't have to be heat resistant

So I've approached Redline_GTR (aka Chris) who has done up a few stickers/decals for me of late.

  • Like 2

Great display JTCC! :thumbsup:

Here's a request to you guys.

I have the rad cap in Pic 1 (compliments of luke gtr)

Terry-167_zpsgvdzqs4b.jpg

And I'd like to get it back to its original look and even better than Pic 2

images_zpsregyvfnr.jpg

Mine is still holding pressure but once refurbished, it will be for static display only and not for road use.

Any suggestions?

So far, walkaou (aka Justin) suggested that...

a) scanning and digitalisation work needs to be done, and then...

b) a new sticker which won't have to be heat resistant

So I've approached Redline_GTR (aka Chris) who has done up a few stickers/decals for me of late.

look this may / may not be able to help but I have some guys that do wraps (Exclusive Wraps) and I can probably get their opinion on this incl costs

just let me know Terry

p.s. also seen you on that R32 GTR DV special - I now want your autograph ;)

Hehe... I haven't even seen the DVD yet Anthony.

walkaou has located a new rad cap as per above from Thailand. Many thanks Justin!

Can someone order it for me if you're Thai yourself?

I shall pay extra for your trouble.

PM me if you're Thai since I can only see the picture, but can't read what I'm supposed to do.

Radiator%20Cap-3_zps88u3k4if.jpg

This is it. Anyone here who's from Thailand?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...