Jump to content
SAU Community

Recommended Posts

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

the motec is still a decent unit... the cal file switching on the motec is far better then any map switching on the vi-pec... on motec you can switch whole cal files and multiple tunes for different cars on the one ecu buy flicking a switch instead of loading the map with software like you have to do with the link / vi-pec, and you can actually switch the cal files while the car is running, so in the nissan patrols what i do with the motec is we put race fuel in the sub tank, and put pump fuel in the main tank, we use the sub tank switch to switch the race gas / pump gas cal files in the motec....

so they are cruising down the highway, a ferrari is commin up, push the switch, cal file and fuel changes automatically, wait 15 seconds for the pump gas to exit the surge tank and race gas starts flowing to the fuel rail, f**k the ferarri a few times then switch it back to pump gas and they are on their way!

but appart from that... i have to think really hard to find any other things that the motec has over the Vi-pec or haltech.

the motec is still a decent unit... the cal file switching on the motec is far better then any map switching on the vi-pec... on motec you can switch whole cal files and multiple tunes for different cars on the one ecu buy flicking a switch instead of loading the map with software like you have to do with the link / vi-pec, and you can actually switch the cal files while the car is running, so in the nissan patrols what i do with the motec is we put race fuel in the sub tank, and put pump fuel in the main tank, we use the sub tank switch to switch the race gas / pump gas cal files in the motec....

so they are cruising down the highway, a ferrari is commin up, push the switch, cal file and fuel changes automatically, wait 15 seconds for the pump gas to exit the surge tank and race gas starts flowing to the fuel rail, f**k the ferarri a few times then switch it back to pump gas and they are on their way!

but appart from that... i have to think really hard to find any other things that the motec has over the Vi-pec or haltech.

And that doesn't matter to me at all. I dont need that feature. Boost map switching maybe. But the Link can do that.

My more main concern is the ECU making complex decisions based on Oil pressure vs RPM, Boost Pressure vs Fuel Pressure etc.

What do you think of the Link KnockBlock GT? Is it a good investment to have it wired into the G4 full time. Or will the standard knock readers on board be ok. I dont intend on running the engine close to knock so i dont think it would be feasible for me.

What do you think of the Link KnockBlock GT? Is it a good investment to have it wired into the G4 full time. Or will the standard knock readers on board be ok. I dont intend on running the engine close to knock so i dont think it would be feasible for me.

I would also like to hear of anyones experience using the Link KnockBlock (using it wired in all the time).

Its crap how the Link G4 doesn't use the factory knock sensors.

Im sure i already mentioned this, but the OLD wire in G4 had knock sensor inputs, but when Vipec came on, they requested that the Link version didnt have it, or electronic throttle control.

I guess to make the Vipec look like a better unit.

Im sure i already mentioned this, but the OLD wire in G4 had knock sensor inputs, but when Vipec came on, they requested that the Link version didnt have it, or electronic throttle control.

I guess to make the Vipec look like a better unit.

A bit wrong there.

The OLD and NEW Xtreme's still have 2x knock sensor inputs. I'm looking at the Instruction manual from their website in front of me. Both the silver and red Xtreme's have 2x knock inputs. Lighting, atom, rx and storm do not.

The E-throttle i am unsure about though.

Ahh OK, it must just be the G4 plug-in, which I have :(

Just had a look at the manual for the plugin R34 and sorry no they do not have knock inputs. The KnockBlock would be a really good idea in your case.

I'm just wondering if its going to be good for the wire in units as they have knock sensors.

Former Link user here.

As far as the manual says, the G4 extreme used to be exactly the same as the current V88. Most likely the current G4 extreme had its features removed so people would have a reason to buy the Vipec over the Link.

The hardware is mostly the same. They have the same boards, just with different outputs on each. The processor is exactly the same.

I haven't tried the Vipec software, but I would wager that it would also be pretty much a copy of the Link software, with the logos replaced with Vipec ones.

In your situation, the added features of the Vipec (current controlled injector drivers, electronic TB control) are useless, so it would be waste to buy one... unless for some retarded reason you plan to use those features in the future.

I personally prefer the Link because they have more information available on their website. Although I'm sure 98% of it would apply to both anyway.

I would also like to hear of anyones experience using the Link KnockBlock (using it wired in all the time).

Its crap how the Link G4 doesn't use the factory knock sensors.

The factory ones aren't reliable that is why.

i have seen the vi-pec version that link made, and its very nice.

HOWEVER i never used it, we sold it to someone else. I don't even use my K-MON anymore, reason being is that you can buy all these fancy tools and listen to whats going on inside the engine but at the end of the day if you really know how to tune you don't need it, you can feel when something is up and the engine is not behaving correctly, and the engine will not knock unless the user does something stupid or you use cheap bullshit parts that changes state.

just tune and go. forget all the bullshit. i will only listen to the engine after i think something is wrong and i have time to stuff around with it. same with all your sensor output functions, its all a big wank, if you build your setup PROPERLY you don't need all that bullshit.

just get a incar fuel pressure gauge and a oil pressure gauge and you will notice when something changes.

Walk piss off. End of story.

GT you may think its all wank but everything im doing has a purpose. Good ones at that.

Letting ecu monitor critical engine data and making a ddcision if something goes wrong is much quicker than a human can react. That is jf said human even notices something wrong.

yeah well good luck with it dude, i am sure you will have issues with false positives, wide band sensors can sometimes give bad readings on a run and also the fuel pressure may spike a voltage without it actually losing pressure like the voltage suggests and your engine will cut out while you are trying to get out in traffic, or make that gap infront of that truck? it could seriously f**k you up dude nothing worse then the engine switching off when you need it the most, its murphys law its going to bite you on the ass believe me.

seriously man, the only one i would connect to a kill switch is oil pressure. even then i probly would not even bother.

it can however be handy for logging purposes only.

i will only listen to the engine after i think something is wrong and i have time to stuff around with it. same with all your sensor output functions, its all a big wank, if you build your setup PROPERLY you don't need all that bullshit.

Do you at least use headphones to listen for very mild knock? When my engine was right on the edge of det we couldn't hear it from in the car but with headphones you could hear the faintest rattle, you wouldn't want to put a car out on the street in that state as if the temperature goes up 10c, your fuel is bad and drops a point or two in octane then you'll have an engine that is a walking time bomb.

Do you at least use headphones to listen for very mild knock? When my engine was right on the edge of det we couldn't hear it from in the car but with headphones you could hear the faintest rattle, you wouldn't want to put a car out on the street in that state as if the temperature goes up 10c, your fuel is bad and drops a point or two in octane then you'll have an engine that is a walking time bomb.

Not as bad when ur running race gas or higher octane as tey would have over there. Much easier to tune with in regards to knock.

yeah well good luck with it dude, i am sure you will have issues with false positives, wide band sensors can sometimes give bad readings on a run and also the fuel pressure may spike a voltage without it actually losing pressure like the voltage suggests and your engine will cut out while you are trying to get out in traffic, or make that gap infront of that truck? it could seriously f**k you up dude nothing worse then the engine switching off when you need it the most, its murphys law its going to bite you on the ass believe me.

seriously man, the only one i would connect to a kill switch is oil pressure. even then i probly would not even bother.

it can however be handy for logging purposes only.

I dont intend on having all of these inputs cut the engine if something goes wrong. Rich and retard is what i'd like to do for most things. I think there was some mis-understanding with what i was doing.

If oil pressure drops at a certain point, i want the ECU to control the accusump's electric valve.

If the accusump is not able to prevent the surge (extended amount of time the engine is starving of oil) then there is a second oil pressure sensor monitoring oil pressure at the engine. If the ECU detects a drop here, i won't cut the engine, but rather have the ECU fire an output for a big f**k off warning lamp. This lamp will be illuminated under many conditions, but if the lamp comes on, i back off, return to pits and see what went wrong by looking at the logged data.

Yes there are many things that may cause nuisance alarms. Thats something i'll have to work out and decide what is necessary to have as a warning.

I'm building my entire care to prevent these problems in the first place. IE, stupidly large baffled and gated sump, proper oil control mods, reliable fuel setup etc etc.

But at the end of the day, having the ECU monitor the engines critical systems and then reacting if there is a fault is something i believe is a good thing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...