Jump to content
SAU Community

Recommended Posts

What's wrong with auto?

I thought it was pretty rare to find a Tommy Kaira in Auto which is the only reason I mentioned the transmission type. I wasn't 100% sure if the TK R34 at wakefield was the same as the TK R34 shown in photos.

Edited by BakemonoRicer

f**k I'm pissed off now

Down in Sydney at the moment at a pub

Go out front to have a smoke and check the car and find some Kent has egged mine and got one one the car next to it as well

Only good

Thing is I bought a quick detailer kit with me so thanks to the bar staff for the buckets of water and got it washed off

Still pisses me off though that some pricks have no respect

f**k I'm pissed off now

Down in Sydney at the moment at a pub

Go out front to have a smoke and check the car and find some Kent has egged mine and got one one the car next to it as well

Only good

Thing is I bought a quick detailer kit with me so thanks to the bar staff for the buckets of water and got it washed off

Still pisses me off though that some pricks have no respect

Luckily you washed it off so quickly, egg is very corrosive and eats into the paintwork at a rapid rate.

When a car looks as immaculate as yours, it will attract good (admiration) and bad attention (jealousy). I'd be hesistant to take my car anywhere near a bar/pub, especially on a saturday night in Sydney. People become animals down there once some drugs/alcohol is in their system.

Edited by BakemonoRicer

f**k I'm pissed off now

Down in Sydney at the moment at a pub

Go out front to have a smoke and check the car and find some Kent has egged mine and got one one the car next to it as well

Only good

Thing is I bought a quick detailer kit with me so thanks to the bar staff for the buckets of water and got it washed off

Still pisses me off though that some pricks have no respect

thats crap mate, luckly you got to it quickly before it could do any harm. Still sucks though.

Edited by wedge_r34gtr

Thanks everyone

Hey how was lowdown

You still there?

What time you heading home?

Hey mate,

Ended up leaving the meet abit earlier as I had a mates party to get to back in newcastle, took off just after the presentation at about 5.

Was a very good turn out, Will post a few pics up later.

That's bs about the egg on your car mate.. I would have been fumming!

Finally home

I must have missed a spot in the dark on the spoiler cause when I checked cleaned the car in the morning some egg was still there and a few paint chips f**kin low life kent

Still a good day down Windsor for the fundraiser

Won't be taking the car next time though

Finally home

I must have missed a spot in the dark on the spoiler cause when I checked cleaned the car in the morning some egg was still there and a few paint chips f**kin low life kent

Still a good day down Windsor for the fundraiser

Won't be taking the car next time though

thats bad luck mate...

FYI have posted some lowdown pics in the wrap thread if you want to check them out.

http://www.skylinesaustralia.com/forums/topic/138419-nissan-paint-codes/page__st__0

Paint codes ^^^

1024571qs0.jpg

paint code on the one above is AH3 - i assume the number is in the same positon for GTT's

Also a useful link http://www.users.on.net/~goofyhsk/info/chassis_plate.html

For supply or to do the job?

Was going to tackle the job myself just need paints

EDIT Just made a thread in the paint section as well

Although now I think about it this a good excuse to do all the stuff I want at the one time

Edited by m.j.h

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...