Jump to content
SAU Community

Recommended Posts

Just picked up my car today, Marulan is going to be so much fun with the new found power... Wow... :D

Hope I can avoid spins like mentioned above :)

  • Replies 238
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

If you have a boost controller you might want to turn it down. 1.5 BAR is a lot especially if you haven't gotten use to the power level.

My first outing in my GTR at about 280 AWKW I found that when you go in too hot / let off / blow offs kick all boost down / compression breaking kicks in violently + unsettled weight balance on the car = spin off the track. It's only recently that I find myself faster on high boost rather than just 1 BAR.

360 is a heck of a lot of power in a RWD car. Take it easy and learn to be smooth first, then apply the power. Of course you'll shoot down the straight like a bat outta hell!

Haha thanks guys (pezhead, fatz) the car is currently at 325-330 and is nuts... If I have to plumb back the gate I reckon the power will be 320ish and the tyres will be MUCH better so should be ok :)

Yea they will have to stuff a tree up my race cars exhaust to get it under theRe limit

Butt plugs all round eh? Lol....

What are you guys planning? Staying down that way etc?

Haha thanks guys (pezhead, fatz) the car is currently at 325-330 and is nuts... If I have to plumb back the gate I reckon the power will be 320ish and the tyres will be MUCH better so should be ok :)

I would plumb it back in for this track.

There is a noise limit at the track, and if they find themselves over, they pull the offending cars and find ways to quieten them down (As mentioned earlier)

Not running a screamer will help you immediately.

Yea myself and davo74 have a room with a extra bed if you like booze and cuddles

:blink:

I would plumb it back in for this track.

There is a noise limit at the track, and if they find themselves over, they pull the offending cars and find ways to quieten them down (As mentioned earlier)

Not running a screamer will help you immediately.

Yeah the screamer is stupidly loud, it sounds awesome.... Buts its been designed as a 10min job to flip it back to plumbed back, quite clever!




  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...