Jump to content
SAU Community

Recommended Posts

Hey all !

Yesterday was the Rexnet forum's track day, which I tagged along to enjoy the beauty that is racing around Wakefield park. Great day all in all.. A couple of casualties:

A 180sx with an electrical fire under the dash

EVO6 with a siezed engine

1 blown turbo

Other than that a fairly good day.. Everybody had a great time and us Skylines showed the Rex's a thing or two about real racing with rear wheel drive.. A lot of good drifting and fast times. Hat off to Frankie's R34 GTT which proved to be the real monster of the track. Great sound from that exhaust!!!

Here are some pictures from the day... Most are of my R33 at stages.. Note the picture with a dirt cloud up the top of the screen, and my car around the bottom corner - caused by one very wide drift - oops :D

http://www.boostn247.com/wakefield/skyline...ne/Skyline1.jpg

http://www.boostn247.com/wakefield/skyline...ne/Skyline2.jpg

http://www.boostn247.com/wakefield/skyline...ne/Skyline3.jpg

http://www.boostn247.com/wakefield/skyline...ne/Skyline4.jpg

http://www.boostn247.com/wakefield/skyline...ne/Skyline5.jpg

http://www.boostn247.com/wakefield/skyline...ne/Skyline6.jpg

http://www.boostn247.com/wakefield/skyline...ne/Skyline7.jpg

http://www.boostn247.com/wakefield/skyline...ne/Skyline8.jpg

So when's the next Skyline track day?????? BRING IT ON!!!!!!!!!!!!!!!!!!!!!!!!

:)

Giles..

Link to comment
https://www.sau.com.au/forums/topic/40383-wakefield-track-day-050404/
Share on other sites

hey giles! good to meet you down there, i didnt know you were on sau? i thought you were a work mate of damo's?

anyways, yeah top day, as per usual!!!

next trackday for the rexnet guys will be the 27th of august...carlo has a trackday on the 17th and there is something going on on the 16th too...i think a UAS day.

thanks to 2 people from sau! andrew (for the photos especially) and duncan for their unrequited love and support :P i even managed to get some private driving tuition from the master himself and i experienced, in my own car, some of duncan's driving talent!!! :headspin: with smoothness comes quicker laptimes!

FRANKS_3.jpg

benm, i think i dropped into the 12's, but thats hoping.... ;)

Actually I reckon that car of urs is a very nice steer :P you've gotta expect a 1400kg car to roll a bit no matter how much spring or roll bar you have.

You were having a good drive out there too, its a shame there was so much traffic in some of the sessions, I didn't actually get a time on a lap where you weren't held up so I'm not sure what times....damn quick tho....

yeah rightio. fat bastard the car is, even with my weight in the driver seat its rollin that much! hahaha what a bus! :P

surprisingly it only really got busy when the track was open to all categories in the afternoon? aside from that, i thought it was perfect? only 7 to 8 cars on for each session...

yeah of course I am on here - I'm a mate of damo's and the guys from rexnet, but do remember - I drive a skyline and have some good taste of forum's, hence why this is my main place to be ;)

nah, clutch is still f***ked but I ran low boost on the day so not to stress it out too much.. what an awesome day...

merli - awesome pictures man... started off by saying that you didn't think they were great, but they turned out fantastic. i asked if you would do my wedding day, but i don't think my future bride would be happy with getting married in a drifting skyline down Wakefield's straight... :P

and franks - awesome car - i think you heard me say it about 17 thousand times; but the sound of it at full throttle.... wow! if i were a chick, i'd root ya..

definitely have some good idea's of things I would like to do with the car after seeing some work that the other boys in skylines have done to their to get the type of performance... unreal show boys!!!!

Giles..

wow, what a compliment! :D but im not into chicks who dig my ride only ;)

heres some movies from a mates incar video mount. sorry about the exposure but the camera was obviously setup abit incorrectly. i've ripped them to wmv9 so you should be able to set the video brightness and contrast down a little.

http://members.optushome.com.au/rbwrxmy98/...and_peddler.wmv

http://www.boostn247.com/wakefield/6th/dam...amo_and_ian.wmv

more to come this w/e, including a circuit battle between yours truly and a bloody quick typeR integra (was doing 11's all day)....watch this space ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...