Jump to content
SAU Community

Recommended Posts

Lol , harsh but understandable responses...i too preferred this sound but once I learnt about the physics of the whole thing , I decided my turbo was more important then a sound. Anyone reasonable will come to the same conclusion. The sound is from the fact that the bov is blocked off/not working correctly , leading to air rushing back towards the turbo when the throttle is closed shut. This hair is chopped up by the blades of the turbo leading to the psh psh psh. If you hear this sound it either means that your bov port is blocked or it isn't working correctly. The pressure on the blades usually doesn't do much but in a series 2 r33 the wheel is ceramic not steel and is more susceptible to being damaged. If you really want the sound , as stated above , all you have to do is block of the bov but this may (and is still highly debated) shorten the life of your turbo , especially if its ceramic wheeled.

I was under the impression that it's only the exhaust side that's ceramic on a R33 turbo?

yes this is correct however there have been many failures , thought to have been caused by a blocked bov on series 2 ceramic wheeled skylines as opposed to much less failures to on the s1's . Like I said its still a hotly debated topic as to whether it does any significant damage (you'l hear the vl guys talk bout their hectic flutter setup running strong for 3 years on the stock turbo)...but Id rather keep away from that , fit a pod and just be content with the "whoosh" sound.

Yeah trying not to start that debate.

But.

How does the air on the intake affect/effect the ceramic blades on the exhaust side?

The pressure on the blades usually doesn't do much but in a series 2 r33 the wheel is ceramic not steel and is more susceptible to being damaged.

Yeah trying not to start that debate.

But.

How does the air on the intake affect/effect the ceramic blades on the exhaust side?

it shouldnt...at all...as far as i understand..just pointing out that for some reason the ceramic wheeled turbos arent that tolerable as the completely steel wheeled ones... Id lean towards the compressor wheel being made of nylon in the s2 having something to do with it as well.

if im spewing wrong info , il be more then happy to be corrected as I am fairly new to skylines myself.

Nylon is very very strong. Frankly, I have my doubts that air flowing back through the compressor will do any damage, as there is no load on anything. Actual compressor surge which occurs on throttle when the engine can't consume the air being generated by the turbo; that I could understand how it would damage things as there is significant load on the turbine and therefore the compressor.

But when the shaft is just free-wheeling in decel and off-throttle situations, there is very little resistance to the air flowing backwards. Perhaps on already weakened blades it might put enough stress on them to be the final straw on the camels back to cause major damage, but otherwise the wheels should be built to handle much more stress. The only harm I can see it doing is to performance.

And performance is good. Don't do flutter kids.

yes this is correct however there have been many failures , thought to have been caused by a blocked bov on series 2 ceramic wheeled skylines as opposed to much less failures to on the s1's . Like I said its still a hotly debated topic as to whether it does any significant damage (you'l hear the vl guys talk bout their hectic flutter setup running strong for 3 years on the stock turbo)...but Id rather keep away from that , fit a pod and just be content with the "whoosh" sound.

i for one would like to see these failures.... i have been around sau for quite a while now and i don't recall ever seeing 1 confirmed failure caused by a blocked bov.

also let's not forget R31 and Cefiro RB20 motors never had a bov from factory...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...