Jump to content
SAU Community

Recommended Posts

Hey guys

I'm wondering if it's possible to tune a rb26 on 95 octane and still produce decent numbers with out detonation.

At the moment I'm living in the sticks and 95 is all that's available right now. I have developed a real pesky itch to buy another skyline and the fuel issue is the only thing holding me back.

Cheers

Scott

Link to comment
https://www.sau.com.au/forums/topic/404677-running-95ron-with-300kw/
Share on other sites

i reckon it could be done but youll be limited by how much boost you can run

otherwise you will just comprimise tuning for boost which will give you that doughey effect

many people overseas from memory run spazzo power on penis fuel so it can be done

if you were going to try i would do a reasonable timing map - maybe even just a bit of a tune of the stock map and then run a small amount of boost

and slowly increase boost and go from there

intake temp, engine compression and boost will all work against the lower octane so make sure these are managed well

ie dont have a hot pod sucking hot air

many people overseas from memory run spazzo power on penis fuel so it can be done

That's very different, you can't really compare our octane ratings with other countries octane ratings. Not only does altitude affect the fuels performance, but some places like USA and Canada use the Anti-Knock Index instead of RON, so their numbers look different to ours but are in fact the same or better.

Hey wedge_r34gtr

I sold my r33 before I came to Hedland and now that I'm making good money I want to splurge on an insane gtr but the only thing stoping me is the lack of 98ron.

The only places that sell the required fuel that I know of are Capricorn road house near newman and down karratha way which is quite unfortunate.

Thanks for the info guys, I might just go and buy a road bike instead.

Hey wedge_r34gtr

I sold my r33 before I came to Hedland and now that I'm making good money I want to splurge on an insane gtr but the only thing stoping me is the lack of 98ron.

The only places that sell the required fuel that I know of are Capricorn road house near newman and down karratha way which is quite unfortunate.

Thanks for the info guys, I might just go and buy a road bike instead.

As someone said above - water / methanol injection! Would be perfect and would help in the hot climate up there.

I just done some reading up on the aem setup and it sounds good.

Anyone had any experiance with water/methanol injection?

How long would a tank last?

would placing the nozzle infront of the throttle body be better than placing it infront on the turbo housing?

Any info would be very much appreciated.

I just done some reading up on the aem setup and it sounds good.

Anyone had any experiance with water/methanol injection?

How long would a tank last?

would placing the nozzle infront of the throttle body be better than placing it infront on the turbo housing?

Any info would be very much appreciated.

There's a 16 page thread just a few down ...

the piont is, it can be done if you can be bothered, have no other fuel choice and are prepared to spend some time learning about different setups

if you cant be bothered, expect instant results and want to run the same boost and setup as 98 then yeah it wont work, but if you are open to some research and other options then you can do it with comprimises

  • 1 month later...

im also in hedland and had my GT-R tuned for 95.

You do miss out on alot of power but i would not get a GT-R because of the lack of fuel. i know of many performance cars that have also been tuned for 95 and all run fine without a problem.

My 33 will be up for sale soon, if your looking.

Wasn't Mr Mafias original octane drama because he didn't have a local supply of 98 ULP ?

People I know that work there tell me its often very hot and humid and not the best conditions for high performance petrol engines .

Water injection sounds good and is possibly the only practical alternative if you can't get higher octane fuel or E85 .

Dusty dirty hot humid salt air , enemy of machinery . A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...