Jump to content
SAU Community

Recommended Posts

Hey guys

I'm wondering if it's possible to tune a rb26 on 95 octane and still produce decent numbers with out detonation.

At the moment I'm living in the sticks and 95 is all that's available right now. I have developed a real pesky itch to buy another skyline and the fuel issue is the only thing holding me back.

Cheers

Scott

Link to comment
https://www.sau.com.au/forums/topic/404677-running-95ron-with-300kw/
Share on other sites

i reckon it could be done but youll be limited by how much boost you can run

otherwise you will just comprimise tuning for boost which will give you that doughey effect

many people overseas from memory run spazzo power on penis fuel so it can be done

if you were going to try i would do a reasonable timing map - maybe even just a bit of a tune of the stock map and then run a small amount of boost

and slowly increase boost and go from there

intake temp, engine compression and boost will all work against the lower octane so make sure these are managed well

ie dont have a hot pod sucking hot air

many people overseas from memory run spazzo power on penis fuel so it can be done

That's very different, you can't really compare our octane ratings with other countries octane ratings. Not only does altitude affect the fuels performance, but some places like USA and Canada use the Anti-Knock Index instead of RON, so their numbers look different to ours but are in fact the same or better.

Hey wedge_r34gtr

I sold my r33 before I came to Hedland and now that I'm making good money I want to splurge on an insane gtr but the only thing stoping me is the lack of 98ron.

The only places that sell the required fuel that I know of are Capricorn road house near newman and down karratha way which is quite unfortunate.

Thanks for the info guys, I might just go and buy a road bike instead.

Hey wedge_r34gtr

I sold my r33 before I came to Hedland and now that I'm making good money I want to splurge on an insane gtr but the only thing stoping me is the lack of 98ron.

The only places that sell the required fuel that I know of are Capricorn road house near newman and down karratha way which is quite unfortunate.

Thanks for the info guys, I might just go and buy a road bike instead.

As someone said above - water / methanol injection! Would be perfect and would help in the hot climate up there.

I just done some reading up on the aem setup and it sounds good.

Anyone had any experiance with water/methanol injection?

How long would a tank last?

would placing the nozzle infront of the throttle body be better than placing it infront on the turbo housing?

Any info would be very much appreciated.

I just done some reading up on the aem setup and it sounds good.

Anyone had any experiance with water/methanol injection?

How long would a tank last?

would placing the nozzle infront of the throttle body be better than placing it infront on the turbo housing?

Any info would be very much appreciated.

There's a 16 page thread just a few down ...

the piont is, it can be done if you can be bothered, have no other fuel choice and are prepared to spend some time learning about different setups

if you cant be bothered, expect instant results and want to run the same boost and setup as 98 then yeah it wont work, but if you are open to some research and other options then you can do it with comprimises

  • 1 month later...

im also in hedland and had my GT-R tuned for 95.

You do miss out on alot of power but i would not get a GT-R because of the lack of fuel. i know of many performance cars that have also been tuned for 95 and all run fine without a problem.

My 33 will be up for sale soon, if your looking.

Wasn't Mr Mafias original octane drama because he didn't have a local supply of 98 ULP ?

People I know that work there tell me its often very hot and humid and not the best conditions for high performance petrol engines .

Water injection sounds good and is possibly the only practical alternative if you can't get higher octane fuel or E85 .

Dusty dirty hot humid salt air , enemy of machinery . A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...