Jump to content
SAU Community

Recommended Posts

Hey guys,

Can anyone recommend a good cheap lowering option for my R33 GTS-T (1994).

It has been suggested to me to get a set of King Springs and lower it with them.

Not the Super lows' , but just enough to make it look a bit slicker! About 30mm.

I do intend in the future (12 months or so) to get some Tein adjustable suspension, but until the pesos materialises I would like a cheap alternative that won't make the ride to stiff as I drive it 500k's per week!!

Look forward to your responses.

Cheers,

J-Flash.

Link to comment
https://www.sau.com.au/forums/topic/40477-good-cheap-lowering-options/
Share on other sites

thats as cheap as it gets mate.....other than choppin ur springs which i hope nobody does anymore:D:D good advice is to shop around for prices and ask if peeps know anyone if u know what i mean. my mate scored a set of brand new kings for $150 on all corners of a mates mate.....and we spent a good couple hrs puttin it in....BARGAIN!!

thats as cheap as it gets mate.....other than choppin ur springs which i hope nobody does anymore:D:D  good advice is to shop around for prices and ask if peeps know anyone if u know what i mean.  my mate scored a set of brand new kings for $150 on all corners of a mates mate.....and we spent a good couple hrs puttin it in....BARGAIN!!

MR_Fanny,

Did ya lose any smoothness in your ride. Does it hit the bumps any harsher!

I'd rather do nothin' if the difference is significant.

Thanks for ya comments. Ya couldn't get me a set at thta price could ya! wink wink nudge nudge.LOL

Cheers,

J-Flash

At all cost do not chop your springs.... Get a proper lowered springs like King Springs you won't regret it.  

Get a progressive rate spring, it will stiffen up under heavy load/cornering but is comfy for cruising.

i lowered mine with r33gtr front shocks and springs(bolt straight in)

back shocks were fitted with gtr springs

front is 50mm lower than standard

rear is about 30mm lower than standard

lots of gtr shocks floating around cheap coss everyone fits flashy shocks to them!!!

ride is actually better with these fitted than standard

cheers

I can go one better...

256hotlne.jpg

Meet HOTLNE... a perfect example of what not to do to your car... this mucus coloured R33 sporting vinyls that were bubbled, wrinkled and peeling off, also had a unique modification of NO SPRINGS.

yes the driver had the car sitting on its tyres, and drove around with no springs from the 2003 VIC Glo Show back to whichever rock it crawled out from under.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
×
×
  • Create New...