Jump to content
SAU Community

Recommended Posts

Gcg or any turbo company, should b looking at how to adapt the factory housing on the gtx series as they would make a truck load of cash, basically bringing out a hole new line up for gtr low mounts around the world.... Not everyone what's a big dirty cheater single.....

We can already have the stock GTR comp covers machined to fit the GTX2863R.

The problem is they surge ported the GTX covers for a reason. We don't want to 'try it out' in case its a flop and we certainly don't want to spend someone elses money to see.

To answer the question above. Yes the comparisn from -5 to GTX on Tomei manifolds would be enough also

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

I dont no man, there's a lot of people in this world that have gtr's and low mount twins. They are losing sales because it's a pain in the ass to fit the gtx turbos. So why not design a new cover for em so they can b adapted, could surely couldn't cost that much, I mean they make turbos all day everyday, something like making a housing to fit should b that hard. They have made them all before. I'm guessing, but surely you wouldn't think it was a big deal considering that's what they do....

I dont no man, there's a lot of people in this world that have gtr's and low mount twins. They are losing sales because it's a pain in the ass to fit the gtx turbos. So why not design a new cover for em so they can b adapted, could surely couldn't cost that much, I mean they make turbos all day everyday, something like making a housing to fit should b that hard. They have made them all before. I'm guessing, but surely you wouldn't think it was a big deal considering that's what they do....

Wouldn't the bigger inlet and outlet be a major player in the figures, therefore, even if a surge ported cover with 2 bolt outlets could be achieved, it's restricting the gtx design and why it works so well.. Would make it a different turbo altogether. Be hardly worth it to produce a mediocre result from what can be achieved with the original gtx design?

Not really. They are surge ported to allow air to pass on to the exducer faster. It will allow more flow that way but we could back cut the comp cover to achieve a similar result I think.

The GTX turbo bolts straight inside the turbine housing of a -5/7/9 so if you want your comp cover machined up to suit I can get it done for you no problem.

They will be cheap for whoever wants to trial them that way. I'm talking around $1k a piece but that still hasn't been confirmed yet. STILL waiting for return phone calls on it. Hopefully I can chase it up a little more tomorrow

Daniel can you get supertech valve springs at a good price also? might aswell change them also in case the tomei's are a restriction.

Absolutely. Can I sell them to you at a good price though? Hahaha

*looks around to make sure Nismoid isn't watching*

Damn that's a good price Dan.

What price? I don't know what you're talking about.

sorry for the ignorant question but the GT-RSs have a slot in the comp cover, is that a surge port? and ifso would the GT-RSs comp cover go onto the GTX?

I don't think it would make a difference man. The GTX have a much bigger inlet to the comp wheel than the "GTR friendly" turbos.

The GTX low mounts simply just aren't bolt on :(.

i ready to go i have emails elite racing with all my detail and im ready for anything they want to try i have a shit load of stuff to build the head also if you want a built head and a spare block :P let get the 34 started new project and sponsorship come on guys lets do it for my amazing fiance that has cancer it is her and my dream car lets do it

Hi elite racing iv been trying to contact you about this project if pickups please get back to me today as im about to buy a new step zero stroker kit to build responsive motor please et me know as I dont buy it if im doing this as that stroker kit the say dont push it past 405kw to be safe thanks again guys im willing to get my spare motor shit buy you guys if you want to build it to what ever spec you want thanks again

Hi elite racing iv been trying to contact you about this project if pickups please get back to me today as im about to buy a new step zero stroker kit to build responsive motor please et me know as I dont buy it if im doing this as that stroker kit the say dont push it past 405kw to be safe thanks again guys im willing to get my spare motor shit buy you guys if you want to build it to what ever spec you want thanks again

Hi mate I got your email. I'm not ignoring you but I'm currently booked out until September 5th so getting in to reply is something difficult to do (especially because I don't want to give you a 1 line reply)

You being local is a bonus for test fitups so I'm organising a pair to be sent to me for a test fit if you are willing

Are the manifolds on the engine at the moment?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...