Jump to content
SAU Community

Recommended Posts

Is that list only the Caltex outlets? There are a lot more than that in Victoria anyway.

BP and Shell have a vested interest in oil production, I believe they will never supply ethanol unless mandated by the government.

Perhaps we should also ask why we can only run e85, why not e100 with an additive to stop consumption? That way there would be no legitimate reason to follow the petrol pricing structure... We need a lobby group.

Link to comment
https://www.sau.com.au/forums/topic/405381-e85-locations/#findComment-6455916
Share on other sites

For the SAU Newcastle guys we have -

Caltex - Swansea

Caltex - Charlestown

Caltex - Hamilton

Which isnt bad considering the Central Coast only has Caltex - West Gosford so far.....

Link to comment
https://www.sau.com.au/forums/topic/405381-e85-locations/#findComment-6456534
Share on other sites

curious to see the consistency of their product. Be a shame to destroy a race engine from detonation from a sub quality blend. I'll be sticking to the 200L drums from CSR for a while.

My car is dead with bad E85 now, but i would put it down to a storage issue i think... Was off the pump, into a 200l drum and then into the car a fair while later... Ill pump it all out and replace it with decent pump 85 and should be fine...

Link to comment
https://www.sau.com.au/forums/topic/405381-e85-locations/#findComment-6456573
Share on other sites

curious to see the consistency of their product. Be a shame to destroy a race engine from detonation from a sub quality blend. I'll be sticking to the 200L drums from CSR for a while.

Lol, detonation? Are you kidding?

My stock VQ25 was given a hiding at PI last weekend, The GTX 3076 overboosting to 2.7 bar until I dropped it back to 1.8. Never a sign of det and the exhaust temps were fine as the engine is tuned to over 3 bar. Pump United ftw.

Better keep paying $5 a litre... You don't know what that 96c pump fuel will do... :)

Link to comment
https://www.sau.com.au/forums/topic/405381-e85-locations/#findComment-6458292
Share on other sites

You down to 96c :( basterd!

I was surprised, i filled up at Newcastle at $1.09 which i thought was awesome, 3hrs later i filled up again at Casula and it was $1.19........What a rip!

2.7bar :woot:

Link to comment
https://www.sau.com.au/forums/topic/405381-e85-locations/#findComment-6458304
Share on other sites

BP and Shell have a vested interest in oil production, I believe they will never supply ethanol unless mandated by the government.

And the fact it simply isn't a big money maker. They make more out of normal petrol...

Also there is only really one Ethanol provider in Aus (there are two, but one took a big hit during the QLD floods etc).

So no way Shell/BP are going to let their business pricing and model be dictated by a single other entity. They've said this for a few years, and don't expect it to change anytime soon.

Link to comment
https://www.sau.com.au/forums/topic/405381-e85-locations/#findComment-6458352
Share on other sites

$2.50/litre in the 200L drum. I'm comfortable paying that for the moment for some piece of mind.

once i install one of those ethanol meters in the car i might change my mind.

also...for the big events they often will deliver the 200L to the track for you. That has also been the added benefit....for example Drive bathurst (which apparently is dead).

Link to comment
https://www.sau.com.au/forums/topic/405381-e85-locations/#findComment-6458385
Share on other sites

My car is dead with bad E85 now, but i would put it down to a storage issue i think... Was off the pump, into a 200l drum and then into the car a fair while later... Ill pump it all out and replace it with decent pump 85 and should be fine...

If you store e85 or methanol in 44 gallon drums u have to keep the drum elevated on timbers. If store on concrete because of the cold temperature of the product it will freeze on the bottom of the drum tthen when it defrosts you are left with a contaminated product

Link to comment
https://www.sau.com.au/forums/topic/405381-e85-locations/#findComment-6462192
Share on other sites

United E85 has varied between E82-E84 (haven't actually seen E85) - Caltex was bang no E70 every time.

If you want to be ripped off buying drum E85 for 'piece of mind' go ahead... but there is no way you'd have a tune that would matter if the E% varied a couple percentage points.

the price difference between 200L of 'special' E85 and pump E85 is about $300-$308, you've basically just paid for an ethanol sensor there. Don't even need to have setup for flex fuel, you could just use it to check if you really wanted, not that you would need to though...

Link to comment
https://www.sau.com.au/forums/topic/405381-e85-locations/#findComment-6466092
Share on other sites

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A little more work this week.  Fitted astra power steering pump in the boot with a lowe fabrication bracket. Gave the pump a good clean, fitted Anderson plug and high pressure fitting. With the intercooler being flipped under rad support factory headlights weren't going to work. Ordered a set of origin battle lights, they arrived so got them test fitted. Will require some fiddling to fit nice but was an easy quick option for now. And today we pulled out the manual Rb gearbox and test fitted a ZF 8HP50. It will fit with some casting tabs cut off and small tap of the tunnel with a hammer. Pick up the adapter plate Wednesday so hopefully all bolted in Friday and measure for tailshaft which will be a 2 piece. Been doing a lot of ecu, pdm and tcu loom design so when comes to wiring it in a few weeks will all go smoothly.
    • FYP. Sadly. Even bolt cutters wouldn't take 2 sec. But in the days of 18v angle grinders, nothing is safe.
    • One piece driveshaft I would recommend a dual CV setup otherwise stick to OEM. I have heard most one piece driveshafts cause excess vibration otherwise. The transmission grind I'm quite familiar with. You can try shockproof gear oil, otherwise you need a new transmission. The shifter is extremely simple on these cars. If you want pull apart the assembly and replace the plastic bushing but I doubt that fixes anything. The tail light issue is very common, unfortunately new tail lights are long discontinued. The trunk antenna going up always is because your radio doesn't have a true power antenna control, just remote amp power signal. There is a blank switch plate that you can pop out and install a switch for this or alternatively source a head unit that has proper antenna control. Throttle body sticking you have to disambiguate by disconnecting the cable and seeing if the linkages are the problem or something else. There is a procedure to adjust them, refreshing them is also somewhat involved if that's the issue. I have dealt with many of these issues. Old cars really are fractals of problems. The more you fix the more you discover there is to fix.
    • Welp, you've got a long list of experiences right there. I'd say you're on the right path.
    • That's correct, suits my requirements a bit better. Sure there are also numpties there, however it's generally a different vibe and more my kind of vibe.
×
×
  • Create New...