Jump to content
SAU Community

Recommended Posts

yeah i know hes in AUS :) So am i lol. But im a nice guy and would have sent it anyway :P

And too true.. Bolts generally end up permanent for me too. I had a wine cork blocking my BOV return for over a year :)

Thanks heaps guys! Really do appreciate all the help so far! Great to see a forum that has good people on it! Will try my mech tomorrow about "bunging" it. I seriously hope that fixes the issue. REALLY don't wanna fork out for a rebuild or it gonna be spaghetti for me for the next few months O_o

Curious to know about silicone, I'd say your assumption would be spot on though.

One question, if I ditch the catch can, what will all that oil do if I just run the pipe from one of the top pipes to the othe (factory I assume) will it bellow smoke?

Edited by Spooger

If you want to block a fitting, I use the stoppers that they put on the ends of chair legs, they work a treat and come in all different sizes.

If I leave my car for a few months without starting it the condensation gets pretty rough and it'll breathe a lot of steam, I just let it idle with the oil cooler covered in cardboard off so the oil gets nice and hot and boils all the water out.

They dyno'd it but they only ran it at 8-10 pound. I'm at a loss, I can see these guys rubbing their hands together licking their lips at the money the want to make off me. They claim they can't print off the specs off their dyno'd machine as I asked for them. I don't know if I trust them or not. They said it has a shitload of blow by yet when I have checked it, it was minimal! Hulp!! What do I do? I'm in a regional area and we have only 2 places who know (sorta) how to work on these.

Edited by Spooger

Ok I searched high and low, repco, Burton's, super cheap, autobahn, and even Clark's rubber. No one has something to block the Pcv outlet off the rocket cover.

remove rocker cover, take somewhere to be hot washed and have the hole welded up if you want it blocked, a bolt in the hole doesnt give a fantastic seal and will leak.

They dyno'd it but they only ran it at 8-10 pound. I'm at a loss, I can see these guys rubbing their hands together licking their lips at the money the want to make off me. They claim they can't print off the specs off their dyno'd machine as I asked for them. I don't know if I trust them or not. They said it has a shitload of blow by yet when I have checked it, it was minimal! Hulp!! What do I do? I'm in a regional area and we have only 2 places who know (sorta) how to work on these.

8-10psi would be normal for a stock engine.. but not giving you a print out sounds dodgy.

Excessive blow by is when your dipstick gets blown out of the tube!

You need to do a compression test. Any workshop can do that or you can buy or borrow a compression gauge and do it yourself. You say you are in a regional area - how regional? It always helps to put the town where you live (or the nearest town) so that (a) another member might be nearby and be able to have a look at your car and (b) people can recommend the nearest good workshop. If there is one within a day's drive that might be a good idea before you give up on the car.

If you get a workshop to do a compression test ask them if they can do a leak-down test. It should only be an hour's labour charge. The results should tell you if the motor needs to come out or not.

  • 3 months later...

No, no, no, no, no.

Starting at the PCV fitting, you should have:

PCV to intake rocker cover (as per factory fittings)

Intake rocker cover to exhaust rocker cover (as per factory fittings)

exhaust rocker cover to catch can

catch can to intake side of turbo.

Ditch the stupid filter on the can (and plug the hole).

So basically, the catch can replaces the hose that goes from the exhaust rocker cover down to the intake of the turbo. And the whole system remains sealed and does not vent to atmosphere. And you don't have problems with EPA.

This has to be THE best and easiest explanation to installing a catch can EVER on a RB engine.

Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hooley Dooley these things have some history! If i sell them they will need a certificate of providence to prove they have been in the hands of verified RB20 royalty! They have been stored in a plastic tub, away from sunlight and moisture. They are in mint condition. And they will stay that way, as i have sprung the money for a set of shockworks coilovers. I'm just working on getting them in at the moment, after rebushing the rear of the car, and while the subframe was out i welded in the GKtech reinforcement bracing as well.  They will get a workout at Ararat King of The Hill in November. I ran 48s on the short course there a few months ago, and i am hoping with new bushes and shocks in the rear i can launch a bit harder. There was a fair bit of axle tramp when i tried too hard off the line. a few of the corners had dips mid way which also made the car feel a bit unsettled, hopefully this will help there too.   
    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
×
×
  • Create New...