Jump to content
SAU Community

Hicas Eliminator Kit

SCR48
 Share

Recommended Posts

boostn0199 Grand Master

boostn0199

Posted
Posted

Bear in mind it is a bit of a mission to do this at home as you will almost certainly need to take off the hub assembly to press out the existing ball joint bush.

You dont need to take off the hub to press bearings out, simple tool can do it on the car, even if you do need to take hub off its easy to get off no mission lol.

R.3.2.G.T.R Grand Master

R.3.2.G.T.R

Posted
Posted (edited)

i have one these kits sitting at home waiting to be installed.. i wanna do this at home but my concern is finishing the job over the weekend as i have read its a pain to press out the balljoints

boostn0199: what did u use for the job? how long does it typically take?

ps - i have a small dremel which i was thinking of using to cut of the lip on the balljoint and press it out from that direction - anyone done it this way?

Edited by BWRGTR
RB 30 Enthusiast

RB 30

Posted
Posted (edited)

Modification of a steering system. Not permissable without engineering.

Hope mine is hard to see under the rear diffuser... Pretty sure they will have a field day with the Decat pipe. Is my fuel system illegal 2?

Under Car, New Exhaust and Fuel System

Edited by RB 30
GTSBoy Grand Master

GTSBoy

Posted
Posted

Take my tip. If it is still in whatever garish colour it came in, take it off and paint it black before crossing your fingers. Will make it much less likely to get spotted. Cops may or may not be bright enough to know whether the car was supposed to have HICAS, but they can sure as f**k tell that a bright orange/blue/red component is not original.

RB 30 Enthusiast

RB 30

Posted
Posted

Take my tip. If it is still in whatever garish colour it came in, take it off and paint it black before crossing your fingers. Will make it much less likely to get spotted. Cops may or may not be bright enough to know whether the car was supposed to have HICAS, but they can sure as f**k tell that a bright orange/blue/red component is not original.

True that! I still have a airbox! and a cat some times lol

boostn0199 Grand Master

boostn0199

Posted
Posted

i have one these kits sitting at home waiting to be installed.. i wanna do this at home but my concern is finishing the job over the weekend as i have read its a pain to press out the balljoints

boostn0199: what did u use for the job? how long does it typically take?

ps - i have a small dremel which i was thinking of using to cut of the lip on the balljoint and press it out from that direction - anyone done it this way?

Basically i made up a mini ball joint puller and pusher so it pushes witha bolt to get it out. For me even if i did it with removings hubs wouldnt take memore than couple of hours.

  • 3 months later...
  • 1 month later...
AshR34GTT Enthusiast

AshR34GTT

Posted
Posted (edited)

Do ppl who put these lock out kits in, only do it to improve track performance, or do ppl experience issues with the HICAS on everyday road use?

I've never tracked my car, but I do know that when I engage HICAS on the road, I can take corners up to 20 km/h faster then when it is disengaged.

So just curious as to why do many ppl install lock out kits? I personally think HICAS is excellent, but like I said, never tracked my 34.

Edited by AshR34GTT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Shoota's R33 GT-R RB30/26

      By Dose Pipe Sutututu · Posted

      oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • GoHashiriya
      R34 Skyline Sunroof Won't Tilt/Vent

      By GoHashiriya · Posted

      I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • GTSBoy
      R34 Skyline Sunroof Won't Tilt/Vent

      By GTSBoy · Posted

      Something's broken.
    • PranK
      Shoota's R33 GT-R RB30/26

      By PranK · Posted

      It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...