Jump to content
SAU Community

Recommended Posts

Bear in mind it is a bit of a mission to do this at home as you will almost certainly need to take off the hub assembly to press out the existing ball joint bush.

You dont need to take off the hub to press bearings out, simple tool can do it on the car, even if you do need to take hub off its easy to get off no mission lol.

i have one these kits sitting at home waiting to be installed.. i wanna do this at home but my concern is finishing the job over the weekend as i have read its a pain to press out the balljoints

boostn0199: what did u use for the job? how long does it typically take?

ps - i have a small dremel which i was thinking of using to cut of the lip on the balljoint and press it out from that direction - anyone done it this way?

Edited by BWRGTR

Modification of a steering system. Not permissable without engineering.

Hope mine is hard to see under the rear diffuser... Pretty sure they will have a field day with the Decat pipe. Is my fuel system illegal 2?

Under Car, New Exhaust and Fuel System

Edited by RB 30

Take my tip. If it is still in whatever garish colour it came in, take it off and paint it black before crossing your fingers. Will make it much less likely to get spotted. Cops may or may not be bright enough to know whether the car was supposed to have HICAS, but they can sure as f**k tell that a bright orange/blue/red component is not original.

Take my tip. If it is still in whatever garish colour it came in, take it off and paint it black before crossing your fingers. Will make it much less likely to get spotted. Cops may or may not be bright enough to know whether the car was supposed to have HICAS, but they can sure as f**k tell that a bright orange/blue/red component is not original.

True that! I still have a airbox! and a cat some times lol

i have one these kits sitting at home waiting to be installed.. i wanna do this at home but my concern is finishing the job over the weekend as i have read its a pain to press out the balljoints

boostn0199: what did u use for the job? how long does it typically take?

ps - i have a small dremel which i was thinking of using to cut of the lip on the balljoint and press it out from that direction - anyone done it this way?

Basically i made up a mini ball joint puller and pusher so it pushes witha bolt to get it out. For me even if i did it with removings hubs wouldnt take memore than couple of hours.

  • 3 months later...
  • 1 month later...

Do ppl who put these lock out kits in, only do it to improve track performance, or do ppl experience issues with the HICAS on everyday road use?

I've never tracked my car, but I do know that when I engage HICAS on the road, I can take corners up to 20 km/h faster then when it is disengaged.

So just curious as to why do many ppl install lock out kits? I personally think HICAS is excellent, but like I said, never tracked my 34.

Edited by AshR34GTT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi everyone, I've been wrestling with this for a while now and have been trying to find out the cause. For context, the turbos used are Garrett 2860 -5s, the BOV is a BNR32 HKS SSQV IV kit, the car is currently tuned to ~470 whp on 17.5 psi. The car drives normally, pulls well when it doesn't happen, and I can replicate it fairly easily. It does not sound like turbo shuffle or flutter. The engine has only a thousand or so miles and has had this behavior since it was completed. After my engine was built for my R32 GTR, I noticed that the car now sometimes makes an air discharge sound on what appears to be positive boost pressure that sounds really similar to a BOV. I had thought that it was a BOV issue but even when replacing it with a brand new unit, the sound persisted. It seems like it's coming from the passenger side but I may be mistaken. The closest scenario I could find was this post here https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/ started by @yakshii and it sounds very similar. As in, at partial throttle once I reach positive boost I begin to hear the same psh psh psh psh psh sound like air is leaking somewhere when I keep the throttle in the same position. It most commonly happens in 4th gear at around 3-3.5k RPM and 5th gear around 2.5-3k RPM, which seems to coincide with normal positive boost thresholds. It might be similar to what @Austrian GTR mentioned about his own HKS SSQV. Notable difference would be that when he applies more throttle when it happens, it stops. In my scenario if I apply more throttle during this repeated psh psh psh sound, the cadence of the sound gets faster and louder rather than stopping. If I lift off slightly and apply throttle again, it will normally stop and pull without issue. I've checked all rubber couplers to ensure that they are tight, but have not gotten the opportunity to properly do a pressurized boost leak test. If anyone has had similar experiences or thoughts on what might be the cause, I'd be very keen to hear them. I also have a video of it happening from inside the cabin, if that would make it easier to understand: https://youtu.be/2zqZXcx8jbA
    • I'd want at least $40K for mine, but thats easy to say cos I'm not selling anyway.
    • That's incorrect. We have 4 seasons, consisting of pre winter, winter, post winter and a small glimpse of hope! 
×
×
  • Create New...