Jump to content
SAU Community

Recommended Posts

Hey guys just a quick question. We all know that increasing rim size and there fore overall rolling circumference of our tyres can throw our speedos out but can we make more horsepower and if yes is it signifigantly difference between different size tyres.

Link to comment
https://www.sau.com.au/forums/topic/407110-dyno-does-wheel-size-matter/
Share on other sites

Hey guys just a quick question. We all know that increasing rim size and there fore overall rolling circumference of our tyres can throw our speedos out but can we make more horsepower and if yes is it signifigantly difference between different size tyres.

yes in theory it can.

No, dont got and put 22's on your car.

I am interested how the wheel diameter difference affects the horsepower the dyno reads?

I understand the skinnier tyres/lighter wheels but if these are equal and the only difference is the actual diameter of the wheels why would the horsepower measured change?

Power=forcexdistance / time

Force in the dyno is calculated by the accelaration of the drums (not measured through the spark reading for engine RPM) and the weight of the drums which is a known constant as is the distance (the circumference of the drums).....I am probably missing something obvious but I really don't see how rim size affects horsepower.

you have a point regarding the equation. i was wondering the same thing about that. i think that is why using a different gear doesn't alter the readout by much. however i think there is still a slight variance in there. and going to bigger wheels gives a taller ratio which will have a small effect on power. but i think more of it probably comes from the weight difference of the bigger wheels.

and if it does make a difference, this may play a part in how some people are able to get higher readings from a car running a stock ecu/turbo, other than the usual "happy dyno" call.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...