Jump to content
SAU Community

Recommended Posts

I had a car cover on my custom painted rx7 outside all the time in LA cali and denver for 11 years , it wasnt a custom cover but flannel soft on one side slightly water proof but breathable on the other 1 layer of fabric , had some elestic around the bottom corners and lock with cable on middle of it , as you know acid rain is in both towns , snow a foot deep or more , salted roads in winter , criminals , windy as hell around 200kph sometimes in denver front range , sand , salty air in LA lived on a large boat ,batteship so car was parked on the marina all the time , truck soot the docks in fast and furious is where it was parked

Car cover issues

Wind will wind it up only the cable lock will keep it on and not in outerspace took about 60-70km winds to fling it loose

Snow when it melts it left the acid dirt sitting on the paint like a big filter of crap not likely here

Rain , it must breath or it will rot the paint and the cover , it has to be able to dry itself pretty quickly not sit soaking for days unless its still raining

Also leaves crap but not as bad

Car must be spotless on rub points if its tight

Has to be able to clear hot tailpipes

Mirrors must fit

Must be locked on always , it will fly off or be stolen

Overall it saved my paint job once it tore that was it the paint was stuffed from uv acid etc

Cant put on fresh paint either

bonus of cover

Theft deterent the crips tried to steal my car a thousand times but the cable lock setoff. The alarm easy it can be tied into alarm trigger they never got it !! stops people stealing tunes , out o sight out of mind

Car stays cleaner cause your careful more ,

Car is much cooler

Saved my car from hail a few times when other cars had windows knocked out and dings galore

Saves on dings and nicks a lot

Saves the bird poo

Mark it with your rego or the ticket police will love you , rego must be visible

Drawbacks

Cost up front 300+ for non custom one

Takes about 4-5 min to install if its not windy and put away properly thats a average you can do it faster if needed

If you dont like making beds forget it its very close to that haha

A soggy cover stinks in the boot / bag

Must be scotchgaurded often it looses it fast in the extremes

Can attract crims - curious buggers

Can attract graffiti artists

Must be used often and can be a pain to be so padantic about a car ( ladys hate to come second haha)

can scratch if your not careful

Catch fire on tailpipes

Yet another bulky item to take to laundry mat to wash ! Its heavy as fark wet home laundry will die

can mold and cause car inside to mold if your not careful in drying it

Now days microfiber ones would be great but hard to find unless you shop usa and they never had skylines so a custom one will be hard to find

Dont buy a plastic based waterproof one they kill the paint they dont breathe enough , only good if your not moving the car for months outside

in australia i think it would attract idiots ( vandals)

So i opted to not cover my car , maybe in the garage but out in the open i think it would be a week tops before it was molested Like a naked virgin by some wankers

Edited by Carbon 34
Link to comment
https://www.sau.com.au/forums/topic/407128-gtr-car-cover/#findComment-6495672
Share on other sites

  • 3 weeks later...

I had a car cover made by chief car covers in perth. I gave them my car details and thinks like height of wing. The indoor cover i got is awesome really soft and i am really fastidious with my paintwork (also if good quality car covers are good enough for show cars then good enough for mine). but still strong enough it will last for many,many years. At least give them a call or email and talk to them.

Link to comment
https://www.sau.com.au/forums/topic/407128-gtr-car-cover/#findComment-6524525
Share on other sites

there is no car cover that won't scratch. period.

see how imperfect the paint is on show cars next time and tell me covers are great... the covers are there more for branding/"the reveal"/exclusivity than anything else.

i suppose next we should all use paraffin dusters because that's what they use on show cars...

having a car cover for indoors is a waste of time. Outside... maybe, if it's a really harsh environment - But you're still better off having a good few layers of a very durable sealant on a car IMO, and then use a sun-shade reflective thing to give the interior a bit of protection.

Link to comment
https://www.sau.com.au/forums/topic/407128-gtr-car-cover/#findComment-6529720
Share on other sites

  • 4 weeks later...

I find car covers are good for cars being kept outdoors as it minimises the wear and heat hitting the paint, plastics and rubber lining in the sun - particularly if you drive the car say once a week on the weekends

i had a dodge supercheap auto special for about a week before i decided it was both rubbish and abrasive on soft paint - i ended up going with a Kenco Tyvek car cover, the inner lining is developed with paint manufacturer DuPont meaning it will minimize damage to your clear coat

the best thing about it however is that even thought it is weatherproof and UV resistant, it is the lightest car cover i have come across meaning you can put on and take off the thing by yourself without letting it touch the ground - also comes with repair patches incase you manage to rip or tear a hole in it

Fit-wise i went with the large size which covered my R34 with the big trolley wing perfectly

can be had for around $100 when there are sales

http://www.superchea...258#Description

pic of it on my car;

cover_zps169f0808.jpg

cover%20close_zps0a49cb8a.jpg

Edited by squareznboxez
Link to comment
https://www.sau.com.au/forums/topic/407128-gtr-car-cover/#findComment-6565201
Share on other sites

  • 3 weeks later...

the flannel king size sheet sounds good. mines inside the garage but gets dusty as hell after 2 days

might buy a few wheels and screw it on the roof and string and have like a window blind type cover lol

Link to comment
https://www.sau.com.au/forums/topic/407128-gtr-car-cover/#findComment-6589697
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...