Jump to content
SAU Community

What Injectors Have I Got?

R33ram

By R33ram,
in General Maintenance

 Share

Recommended Posts

R33ram Enthusiast

R33ram

Posted
Posted

Hi,

just need to know whta injectors i have as was told 550cc when bought the car but not sure.I no there red and only pic i could take was engine which doesnt show much.

thought maybe the colour and side feed i think they are can give me a bit of info to tell but not sure...

any help or opinions would be great :)

post-94793-0-31199900-1345736508_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/407682-what-injectors-have-i-got/
Share on other sites
Miguelone Grand Master

Miguelone

Posted
Posted

I'm not entirely certain though. I have a set of injectors here stamped with A46-00 which aren't bright red more of a maroon colour which I bought believing they were S15 480cc's. Have yet to have them flow tested though so unsure what they are.

Larrypop Apprentice

Larrypop

Posted
Posted

They're not nismos, as your running aftermarket plugs and the nismo 740 side feeds are a direct fit, same as the s15 480s .I have sard 550 side feeds that are red but they have the Denso imprint and a serial number, they could be jecs, or no offense eBay specials.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      Rb26 iron block limit

      By r32-25t · Posted

      You don’t need to use full throttle all the time to break these blocks, 500kw at the wheels in more then enough to break them even with an occasional squirt. Hell I’ve seen them break under 400kw
    • Dose Pipe Sutututu
      Question about BoV on RB25DET NEO

      By Dose Pipe Sutututu · Posted

      A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Predator1
      Rb26 iron block limit

      By Predator1 · Posted

      Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • Roy
      Rb25/30 Rb30det Vvt Internal Oil Control

      By Roy · Posted

      So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
    • Kapr
      Question about BoV on RB25DET NEO

      By Kapr · Posted

      Yeah i know that MAF is no no for this type of BoV. The engine has no BoV and "hose/pipes" ..it was all deleted (or probably it was not even on the engine when it was bought  ) It does that "sutututu" noise which i kinda do not want(atmospheric is better IMO...but standalone ECU)  What are the cons of running without blow off on stock RB25DET NEO. It running 5-7 PSI max (it has boost controller)   EDIT: and can Nistune be "tuned" to know there is no BoV to i dont know "know" and be better for a car? I read so many info about no BoV. One guy saying it is bad and hurting the turbo/engine/car and other that it does not...  
×
×
  • Create New...