Jump to content
SAU Community

Recommended Posts

Hi Guys,

As an owner of one of the 100 Australian delivered R32 GT-R's I was curious to know if the R32 enthusiasts in Japan know it even exists?

If so does it get mentioned as something special or unusual?

Or.... is it like America whereby anything that relates to overseas doesn't matter?

Considering these 100 ADM cars were the only R32's that Japan ever exported I thought they may have created a little bit of interest.

Any feedback on this topic would be appreciated.

Cheers,

Bob.

PS........ Here are some attached pics which will help you see the differences with the JDM.

post-78207-0-84947800-1346453783_thumb.jpg

post-78207-0-78524400-1346453824_thumb.jpg

post-78207-0-19431400-1346453836_thumb.jpg

post-78207-0-52086300-1346453862_thumb.jpg

post-78207-0-48409300-1346453875_thumb.jpg

post-78207-0-76479400-1346453910_thumb.jpg

post-78207-0-49615500-1346453928_thumb.jpg

post-78207-0-01493300-1346453953_thumb.jpg

post-78207-0-80331200-1346453973_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/408275-adm-r32-gt-r/
Share on other sites

+1 bump for curiosities sake (so clean hope to see it one day bob

Thanks mate.......

Are you coming down to the Nationals on Saturday?

I'm displaying both cars so if you can make it , you'll see it....

Bob.

Link to comment
https://www.sau.com.au/forums/topic/408275-adm-r32-gt-r/#findComment-6518229
Share on other sites

  • 2 months later...

It appears that the ADM r32 has an external antenna on the roof...makes sense..my fm reception is poor most of the times...

Yes the reception is poor through the aerial in the front screen and even worse when you run a band expander as I do (in my JDM) as I have the original radio cassette in there.

The ADM's got the Bosch centre roof aerial matched with the upgraded stereo system from the Maxima.

Works heaps better, no comparison.

Bob.

Link to comment
https://www.sau.com.au/forums/topic/408275-adm-r32-gt-r/#findComment-6620532
Share on other sites

Hey Bob, that's a mint example you got there ! :thumbsup:

I didn't know of the ADMs myself, certainly appears to be a rare collectible

Really?! How did you not know about it when you bought one? :laugh:

Or you just assumed they all were JDM R32 GTR's imported?

Link to comment
https://www.sau.com.au/forums/topic/408275-adm-r32-gt-r/#findComment-6629929
Share on other sites

I dont think they really know or care about the ADM, as they had 43000 units pumping out over 5 years to keep'em busy.

And as most if not all not don't know about the term JDM, I dont think ADM been talked about much.

The other day i had a read on the john, and stumbled across your ADM in Unique Cars magazine. Well i read the article, then read this thread and noticed the plates matched, as did the name bob, Thats when i realised it was you.

Every clean paint , Every nice car. That has to be one of the tidiest 32 gtr's around

Link to comment
https://www.sau.com.au/forums/topic/408275-adm-r32-gt-r/#findComment-6631246
Share on other sites

I dont think they really know or care about the ADM, as they had 43000 units pumping out over 5 years to keep'em busy.

And as most if not all not don't know about the term JDM, I dont think ADM been talked about much.

The other day i had a read on the john, and stumbled across your ADM in Unique Cars magazine. Well i read the article, then read this thread and noticed the plates matched, as did the name bob, Thats when i realised it was you.

Every clean paint , Every nice car. That has to be one of the tidiest 32 gtr's around

Thanks mate.....

Bob.

Link to comment
https://www.sau.com.au/forums/topic/408275-adm-r32-gt-r/#findComment-6631261
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...