Jump to content
SAU Community

Recommended Posts

Hey guys.

Some of you may know I been stressing over if I have a vac leak or not and after hooking up a compressor I couldnt find anything.

Finally decided to give the car a beating today after getting my clutch sorted and I had a strange issue.

Seems in 2nd where it used to build up 20psi very quickly is only building up to around 18 and is pretty sluggy.

Once I get it into 3rd it makes 20 psi still.

Just seems odd as it's running straight off the actuator which is a 20psi spring

Any ideas would be appreciated

Link to comment
https://www.sau.com.au/forums/topic/408445-boost-difference/
Share on other sites

Already Smashed out ages ago

I have tried the pressure test and tried blocking off all the parts air was coming to but couldn't find anything.

Also checked all the cooler piping.

I wish some in the ACT had a smoke tester because that would be perfect

Already Smashed out ages ago

I have tried the pressure test and tried blocking off all the parts air was coming to but couldn't find anything.

Also checked all the cooler piping.

I wish some in the ACT had a smoke tester because that would be perfect

Autotech do I believe.

Think about what boost is, and what determines boost. This leaves you with a handful of possibilities:

Leak in intake

Faulty BOV

Faulty actuator

Faulty boost controller

Blocked exhaust

Then on the unlikely possibility it's the turbo at fault:

Faulty waste gate flapper

Could also be faulty boost gauge showing wrong when nothing has changed.

Nah you can hear it whistle when around about -40 to -50 vac

also still has a whine noise when on boost.

You can also notice it is lacking in power.

Jez has told me to make sure the turbo is secure which I will check as soon as I get home.

Also will check all the bolts on the exhaust.

When you stick your head in the engine bay and rev it real hard you can smell exhaust fumes but unable to determine if thats just blowing back from the exhaust or not.

But yeah checking all the bolts and will report back

Yeah the turbo dump was a little loose.

We did them and checked the turbo bolts but they seemed fine.

Took it for a spin and it was boosting fairly well.

2nd gear seems to make boost different to when in 3rd which I didn't think was possible.

On the way to work it still managed to whistle again at around the same vacume.

Not sure if related but I cleaned the AAC and put that back on plugged it all back in and no matter what I do the car idles at 1500rpm unless I unplug it

Maybe the AAC hose is damaged? there was a thread like 3~4 years back where one guys' AAC hose (from the cross over pipe) melted and couldn't work out why it was running like shit. Turns out the underside melted because of his turbo.

Just a though :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I found a supplier for an arm in NZ. https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-rh-side?srsltid=AfmBOopMdfCFDc_8yVZZ9kq5nIngPHRTBzUU8v4SAptJaRO52Wjs0bC6 I looked closely at the photo of that one and the Z1 arm, and it's the same bloody arm. Scratches all match in the photo 😂 How hard is it to change that joint? Also they seem to be listing two options https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-balljoint-rh-side?_pos=1&_sid=229acde44&_ss=r And now I have no idea what size I'd need yay
    • Ill review it again, from memory when I first saw some of Trailer Park Boys I wasn't a huge fan. I ended up at Letter Kenny after watching Shoresy, which is a bit ass backward, ha ha
    • "lol dunno" either But like you, I can't see any reason they would need to be different LHD to RHD
    • I agree with you WRT the hard top. MX5's may be one of the better looking soft tops but I cannot think of ANY car, EVER that looks better with a soft top vs a hard top (or a designed roof). At all, ever. I also feel this way about the C5 Vette, the Z06 looks horrible compared to it's original form, it has an exaggerated version of the differences you're talking about.  
    • Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
×
×
  • Create New...