Jump to content
SAU Community

Maximum Power On Stock Rb26-Bottom?

TP_

By TP_,
in Engines & Forced Induction

 Share

Recommended Posts

TP_ Contributor

TP_

Posted
Posted

Hi!

My Stagea 260RS is currently mapped to 575hp (497awhp), the guy who tunes my car told me to not go higher than 1.4 bars of pressure with my GT2530 turbos when running a stock bottom.

If I don't recall wrong, I've seen people here with ~600hp on stock bottoms.

A friend drove his R32 GTR for 80 000 kilometers with 560hp and a rev limit set to 8500 on a stock bottom RB26 over a 5 year period, the oil pump gears finally broke due to usage of launch for 2 summers.

How much boost/hp is safe?

Thanks

Mattias@Sweden

Link to comment
https://www.sau.com.au/forums/topic/408940-maximum-power-on-stock-rb26-bottom/
Share on other sites
The Dan Grand Master

The Dan

Posted
Posted

Hi!

My Stagea 260RS is currently mapped to 575hp (497awhp), the guy who tunes my car told me to not go higher than 1.4 bars of pressure with my GT2530 turbos when running a stock bottom.

If I don't recall wrong, I've seen people here with ~600hp on stock bottoms.

A friend drove his R32 GTR for 80 000 kilometers with 560hp and a rev limit set to 8500 on a stock bottom RB26 over a 5 year period, the oil pump gears finally broke due to usage of launch for 2 summers.

How much boost/hp is safe?

Thanks

Mattias@Sweden

Do you trust your tuner?

SiR_RB Grand Master

SiR_RB

Posted
Posted

Is this on E85 or 98 octane?

Mines making around 465rwhp stock bottom end for around 10'000kms so far on 98

No issues, compression still at 160psi each pot, done 2 drag days with another coming soon, on around 21psi

But I trust my tuner 100% and I'm prepared to rebuild "when" the engine has enough

Their is no magical limit depends on alot of variables like tune/condition of engine/fuel/ max revs etc etc

  • Like 1
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

If I don't recall wrong, I've seen people here with ~600hp on stock bottoms.

A friend drove his R32 GTR for 80 000 kilometers with 560hp and a rev limit set to 8500 on a stock bottom RB26 over a 5 year period, the oil pump gears finally broke due to usage of launch for 2 summers.

How much boost/hp is safe?

How long is a piece of string?

Depending on age, use, condition, servicing, fuel - and anything else you can think of - will depend on how long it will last.

Will it last forever? Highly unlikely. Have seen people with only 450rwhp end up having to rebuild after 2-3 years of circuit racing as the motors just started to breathe heavy. So not blown, and not tune related, just age and use.

If you can't/don't want to rebuild, then don't chase the power. It's as simple as that really.

  • Like 1
vh45tt Contributor

vh45tt

Posted
Posted

How long is a piece of string?

Depending on age, use, condition, servicing, fuel - and anything else you can think of - will depend on how long it will last.

Will it last forever? Highly unlikely. Have seen people with only 450rwhp end up having to rebuild after 2-3 years of circuit racing as the motors just started to breathe heavy. So not blown, and not tune related, just age and use.

If you can't/don't want to rebuild, then don't chase the power. It's as simple as that really.

thats very true.

GTScotT Grand Master

GTScotT

Posted
Posted

+1 how long is a piece of string. Have seen plenty of blown RB26s that were still in mostly factory trim (stock turbos, stock tune, etc).

I personally wouldnt put 600whp through one and expect it to last very long at all. My personal feeling for a limit on these things is 500whp, and I'd put a very forgiving 30,000 km life on it at most (street driving with some fun here and there). Some people will have seen more, most would have seen less. Thats just my opinion from reading countless posts and knowing people who have built such setups.

SiR_RB Grand Master

SiR_RB

Posted
Posted

Think also the main things are to keep oil temps under control with an aftermarket oil cooler

Run good quality engine oil (ester base 100% synthetic)

Keep intake temps down (turbos not at their limit pushing hot inefficient air down its throat)

Keep the rev limit sane (eg under 8000rpm)

Then you might have half a chance of it lasting abit longer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • joshuaho96
      Jacks that fit under GTR lips that can reach the subframe?

      By joshuaho96 · Posted

      On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
×
×
  • Create New...