Jump to content
SAU Community

Recommended Posts

TAMPERED MOTORSPORT MELBOURNE CUP TRACK DAY - NOVEMBER 6TH

As I have mentioned to you all in previous emails, the 16th September has already been booked out by 2 private groups. Which leaves us just 2 more track days for the year.

The next one coming up is 6th November, which is Melbourne Cup Day holiday (Tuesday)

The details of the day are……

Entry Fee: $160 Including Electronic Timing

Spectators are more than welcome, and there is no cost to come and watch. Also you can go for a ride in the cars but you must sign on with a Passenger indemnity first. Due to the amount of passengers at previous events our insurer has put a small levy on passengers of $20. You can just pay this when you sign the forms at the Scrutineering office.

The day will kick off when scrutineering starts at 7:30am. You will need to do your paper work at the scrutineering office before you have your car checked. Please make sure you have removed all loose items from inside the car.

YOU WILL NEED:

Long sleeve and long pants of non flammable materials i.e. No Nylon

AASA license which can be bought on the day for $50 (these last for 12 months) or CAMS L2S

Closed footwear

Helmet that complies to Australian Standards (has ASA or Snell Sticker)

Car needs to be in a good condition, no oil leaks, no loose items in the car and battery secure.

Good condition tyres

Working seatbelt (give it a pull and make sure it locks)

All people wishing to attend need to make payment to the specified bank account. When you send your email with your details you will be sent an entry form as well as payment details. You will need to email the following details or you can click and enter ONLINE here with a credit card

Full Name:

Email Address:

Mobile Phone Number:

Car Make & Model:

Colour:

Capacity:

Previous best time at Winton:

Forum/Workshop/Car Club you are a part of: (to be listed on Timing Sheet)

SO IF YOU ARE WOULD LIKE TO COMPETE EMAIL YOUR DETAILS TO

[email protected]

Link to comment
https://www.sau.com.au/forums/topic/408970-winton-cup-day/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

They're all my FB page mate..posted on Monday. Or look in the national events thread here for a video of me coming off turn 1. :)

its a fun track, very easy to drive .Main straight sucks balls though, you power on hard then just when your Building up good speed you have negotiate this stupid dogleg ,brake and turn but get through that and the lap is yours for the taking..for me it was all 4th gear except for the 3rd gear fishook which is fun to power out of hard..

I come off twice at turn one..all fun and games though..best was a 1:15 which I was happy with..hopefully I can make it up there again soon ;)

Link to comment
https://www.sau.com.au/forums/topic/408970-winton-cup-day/#findComment-6529313
Share on other sites

They're all my FB page mate..posted on Monday. Or look in the national events thread here for a video of me coming off turn 1. :)

its a fun track, very easy to drive .Main straight sucks balls though, you power on hard then just when your Building up good speed you have negotiate this stupid dogleg ,brake and turn but get through that and the lap is yours for the taking..for me it was all 4th gear except for the 3rd gear fishook which is fun to power out of hard..

I come off twice at turn one..all fun and games though..best was a 1:15 which I was happy with..hopefully I can make it up there again soon ;)

Intradasting

Keen to see pics and vids :D

Link to comment
https://www.sau.com.au/forums/topic/408970-winton-cup-day/#findComment-6529351
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...