Jump to content
SAU Community

Recommended Posts

Hey guys,

i drive a manual 98' 34 NA, drove till the tank was empty and filled it up with 100 premium from united, which i pump regularly.

I got 450ish K's outta my tank before the light went on again.

Just wanna find out if you guys get more or less, is my lead foot too heavy or light?

Link to comment
https://www.sau.com.au/forums/topic/409290-how-many-ks-per-tank/
Share on other sites

Sounds about right to me, I think I get a bit less than that; probably between 400-450 when the light comes on (can drive around with the light on though, obviously).

I think I'm averaging 12L/100km or so... I pump 98 only. Not great :/.

Think should really be able to get 10-12. I granny around all the time as well, so dunno haha.

Edited by kaitoukid

Hey guys,

i drive a manual 98' 34 NA, drove till the tank was empty and filled it up with 100 premium from united, which i pump regularly.

I got 450ish K's outta my tank before the light went on again.

Just wanna find out if you guys get more or less, is my lead foot too heavy or light?

as i say in every fuel economy thread, the fuel light coming on is not a measure of economy as it will come on at a slightly different point in every car. you are best off just paying attention to how many ltires you put in and then using this, with how far you have travelled to calculate your exact fuel economy in Litres/100kms, as this will give you a better indication as to whether you are getting good or bad economy. someone elses light may come on with 5L more fuel in the tank, meaning that they would get about 50kms less than you, even though they may actually be getting the same fuel economy.

plus there are many variables in fuel economy. things like driving style, driving conditions (stop/start heavy traffic, or light flowing traffic. hilly areas. lots of short trips, etc)

The best fuel economy I got out of my R34 while it was NA was about 9.5L/100km

The worst was about 40L/100km :laugh:

Now that the car is turbo my average fuel consumption has actually improved (when I'm not thashing the hell out of it ;) )

its a 60L tank yes? so when the light comes on you've got say 10-15L still in there, i know for a fact i drove my car to the tuner with the light on and got there with it under the empty line , syphoned all the fuel out ( was doing Eflex) and i got 10L out of it

so if we said there was 10-15L left when you have done 450km then its actually very good economy and around the 10-12L/100km :yes:

450km = :cheers:

Edited by SliverS2

I did (I wasn't paying enough attention at 7am this morning lol)

About 420ks with 50L with my v8 commodore

And I drive it pretty damn hard + 99% of my driving is in peak hour

Helped by 1400rpm at 80km/h and it accelerates up hills like that

While that may seem thirsty, it's less than the skyline/supra/soarer

And runs 100% fine on 91 octane so the is a 15c/L saving right there :)

ahaha, yeah. coles and woolies fuel (including e10) all the way for my wagon. the most revs my car sees on the way to work is 2500rpm, and that's taking off from the lights. once i'm on the highway it doesn't go above 2000rpm, even when overtaking. got the trip computer to show over 1000kms to empty a few weeks back. that's a little bit optimistic though. i generally get about 670kms before the fuel light comes on, and about 750kms before i actually fill up (and there's still usually about 12 to 15L left in the tank). one day i will take a fuel tin with me and see just how far i can get before it runs out. i reckon i should be able to hit 900kms from the 75L tank. not bad for a hunk of shit with over 250,000kms on the clock

and because it's all highway driving, i do my oil changes at 15,000kms, and the oil still looks good.

You guys have to rev to 2500RPM? Stop revving so damn hard!

I only rev my coon to 2500, maybe 3000RPM if I want to go somewhere f**king quickly.

Otherwise, keep her below 2000RPM all the way, cruise at 100KM/H smack on 1500RPM... And it pulls hills at that :P

Oh, and freeway does 8L/100KM with 4 adults cruising at 110 - 120KM/H, with a few hits here and there.

You guys have to rev to 2500RPM? Stop revving so damn hard!

I only rev my coon to 2500, maybe 3000RPM if I want to go somewhere f**king quickly.

Otherwise, keep her below 2000RPM all the way, cruise at 100KM/H smack on 1500RPM... And it pulls hills at that :P

Oh, and freeway does 8L/100KM with 4 adults cruising at 110 - 120KM/H, with a few hits here and there.

This, except E39 528i. 1550rpm @ 100kmh. Freeway running 6.6-6.8L/100km. Ha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...