Jump to content
SAU Community

Recommended Posts

I just had to hire a trailer to take my car to the shop. I hired on a saturday for 24 hours from an actual shop, not a kiosk at a servo and had Sunday free as the shop was closed on Sun and returned this morning at 8am. It cost $123 with a $100 deposit which I got back. Just make sure you get one with long slide out ramps. Saves time lol. I to towed it with 2.2 turbo diesel Santa Fe. Aside from slow to 60 it did well .

Probably different places have different rates and deposits. The trailer I just took back was 750kg and a total max load of 1950kg inc trailer and loaded car. The company I used with the price I gave was Move Yourself at McGraths Hill/Vineyard near Windsor. Again it was the shop and not a kiosk at a servo.

Edited by FordyR31

you guys are lucky...pretty much every trailer I've ever hired has been a deathtrap.

towing a car is about the most dangerous thing you can do on the roads, and rental trailers just don't get maintained properly. bad wheel alignment (swaying), brakes not working, no lights, bad tie down points etc etc. Ask frozenwaffles what can happen :(

If you do have to use one, look for one which is obviously new, and keep the speed down (ie stay off the highways)

Wow, doesn't sound good. But the one I had was good. Stable on Freeway speeds too :)

Same. The trailer I had towed straight, brakes worked, tyres had good tread and the shop attendant made sure all the lights worked before I drove away. It also had 4 tie points 2 front 2 back. I was happy with it. Kept to 90 on the F3.

Yeah I sat on 100 and only exceeded that coming to a hill as even tho it was a 3L turbo Diesal it was struggling with my land barge on the back...

Yeah I sat on 100 and only exceeded that coming to a hill as even tho it was a 3L turbo Diesal it was struggling with my land barge on the back...

Yeah I sat on 100 and only exceeded that coming to a hill as even tho it was a 3L turbo Diesal it was struggling with my land barge on the back...

Yeah aim the mirrors down a bit it is helpful...... After a while you forget its there to an extent (Either that or it is actually no longer connected.........Thats bad!) :P

I was lucky as its mostly highway, pennant hills road was the only issue but other than that it was fine :)

Wuss

Try doing Sydney traffic in a truck.

On topic though the last trailer I hired had no brakes and couldn't do over 60 without swaying.

NEVER AGAIN

Wuss

Try doing Sydney traffic in a truck.

On topic though the last trailer I hired had no brakes and couldn't do over 60 without swaying.

NEVER AGAIN

Where was that hired from?

I think actual hire places are more inclined to look after their trailers, I don't trust the servo ones as there is chances they aren't mAintained between hires?

I just had to hire a trailer to take my car to the shop. I hired on a saturday for 24 hours from an actual shop, not a kiosk at a servo and had Sunday free as the shop was closed on Sun and returned this morning at 8am. It cost $123 with a $100 deposit which I got back. Just make sure you get one with long slide out ramps. Saves time lol. I to towed it with 2.2 turbo diesel Santa Fe. Aside from slow to 60 it did well .

cool, ive got the same model, 2007 Crdi elite desiel turbo. http://www.eurodb.com.au/used-car-Specification/HYUNDAI/SANTA-FE/ELITE-CRDi-(4x4)/2007/H3707G/

specs say 2 tonn braked weight is MAX- say trailer is 750, and the car is 1.5 tonn- thats a fair bit over in my books but will be driving accordingly.

Wuss

Try doing Sydney traffic in a truck.

On topic though the last trailer I hired had no brakes and couldn't do over 60 without swaying.

NEVER AGAIN

haha i done syndey traffic in a truck for 1 1/2 years. not fun. and even more so when you have 5 tonn of steel loaded on the back and people insist on cutting me off like i can stop as quick as your little corolla, Would of been a nice wake up call when ive flatened you. Really made me open my eyes and be much more aware though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...