Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Give me a PM if you are selling the stuffed gearbox, I need a new case for my spare, it has a hole in it...

Will do, i was offered 20k cash for my car yesterday.. i may go ahead with that. I can get a work car now and the V will only be a weekender, saves me having to buy a new box and shit. The guys loaded with money anyway.

If you get it all installed, I would be interested to know what you think of the JWT Clutch/Fly and how it compares to the factory Clutch/Fly. I am getting sick of the feel of the factory clutch and the narrow engagement window - I have been thinking about the clutch pedal mods, but haven't got around to doing anything yet.

The downside is I have heard if you replace the factory DMF with a standard single piece flywheel, you get a lot of chatter from the gearbox which can be annoying at low RPM..

If you get it all installed, I would be interested to know what you think of the JWT Clutch/Fly and how it compares to the factory Clutch/Fly. I am getting sick of the feel of the factory clutch and the narrow engagement window - I have been thinking about the clutch pedal mods, but haven't got around to doing anything yet.

The downside is I have heard if you replace the factory DMF with a standard single piece flywheel, you get a lot of chatter from the gearbox which can be annoying at low RPM..

Well apparently the car has an excedy twin place clutch in it now, i've never driven a manual v35 with the stock clutch so i can't be too sure if it's legit..

I saw a factory CD009 at UPS last week. It was put aside because 1/2 the box was covered in fluid - suspect cracked case in transit - LOL!

Oh shit.. don't tell me that haha

  • 3 weeks later...

Update:

I have been in touch with Z1 performance in states over the last few weeks ttrying to find a better deal for what i want.

Here it is so far:

CD009 Transmission

Chromoly Pivot Ball

Stainless Steel Clutch Line

Nismo Pilot Bushing

JWT Clutch & Flywheel (tossing up between Nismo or UR flywheel as they supposedly have less chatter under 2000rpm)

Redline 75w90 gl4 gearbox oil + same stuff with gl5 for diff oil.

Z1 performance originally quoted me $1,699 + $775 shipping for just the gearbox alone.

I approached Coz at ConceptZperformance a while back and received no response, got an email back this morning from Coz saying "shit that's expensive i'll do it for $2194 delivered" definitely happy with that.

Definitely pays off searching around for a good deal as i'm very happy with saving $300.

Costing me a total of $3068 total delivered in 3-5 days which is great.

Now i just need the money!

Yeah cool cool he said he does alot of high value shipments to Australia and no one has complained to him yet about any GST or taxes lol so that'd be good if he does that.

Couldn't have picked a shitter time of the year to spend $3000.. around xmas and my mrs is expecting a shit load of presents as they do..

If they specifiy a figure under $1000 on the customs delcaration, you will probably be fine.. but just be aware, Australian Customs has been cracking down on this sort of thing recently.. hopefully they won't estimate the actual cost of the items to be above $1,000 and therefore won't invesitgate.

Yeah cool cool he said he does alot of high value shipments to Australia and no one has complained to him yet about any GST or taxes lol so that'd be good if he does that.

Couldn't have picked a shitter time of the year to spend $3000.. around xmas and my mrs is expecting a shit load of presents as they do..

just wrap up little bunches of coal... your near a mine. it should be easy for you to get.

From what I know, if the declaration to customs states that the item is under $1k, customs duty won't apply.

However, if you do get it shipping insurance and it doesn't arrive, they will only cover what's on the declaration. Is $750.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...