Jump to content
SAU Community

Massive Epa/highway Patrol Bust Across Melbourne Today!


Recommended Posts

So the story goes, I was on the way to work today driving through Templestowe and noticed traffic was much heavier than usual at 8.30 in the morning. Started getting flashed by on-coming cars on Porter St and I just thought it was a booze bus (yes, strangely at 8.30 am on a tuesday morning :/ ). As I drove past I saw the havoc, cops directing cars into a nearby carpark to get defected and sent for EPA. Lovely. A mate of mine called me at lunch to ask me if I'd gotten through ok and told me the very same thing was happening on Plenty Rd at the same time - morning to Early arvo. I heard that it was also going down in the Western suburbs later on in the afternoon. Who saw it and who got d!cked by the po po?

Edited by Iron Mike

That explains why I was 'randomly' pulled over yesterday morning (after midnight as I'm shift worker), only told to raise the car up, no fines, no canary but wouldn't be surprised if I get a mail from EPA.

It wasn't a HWP but a Commodore divvy van though.

That explains why I was 'randomly' pulled over yesterday morning (after midnight as I'm shift worker), only told to raise the car up, no fines, no canary but wouldn't be surprised if I get a mail from EPA.

It wasn't a HWP but a Commodore divvy van though.

same case, pulled over but got fine cos of too low fuufufufuufuf

+_+

It's been going for a little while, they are setting up shop in random suburbs on main roads for morning rush to pass through, it's not originally set up for defect and EPA, it's more for warrants and unpaid fines. You'll see a whole bunch of clamped cars there. Basically asking to pay the fine immediately or clamped. They are just adding by defecting and EPA lol

Chadstone carpark is popular with the Sherrif's... been seeing them hunting cars in the CBD lately as well, Russell st and Lonsdale st in particular. Always fresh lots of clamped cars I see coming to/from work.

They've been doing bulk EPA/Police/Sherrif/Immigration operations for years.

Nothing new here.

This, Just happens more coming into warmer months as more people are out driving and such

Chadstone carpark is popular with the Sherrif's... been seeing them hunting cars in the CBD lately as well, Russell st and Lonsdale st in particular. Always fresh lots of clamped cars I see coming to/from work.

lol ;)

They've been doing that for YEARS as well. But they love our end of town because a of immigration and so on, it's easy pickings for those not-so-well off.

What they do in the CBD & inner burbs is they have a car with a rego plate scanner. They have a "scout" car that just drives around all day scanning rego's. Soon as they find someone with outstanding warrants in a car park (could just be a outstanding parking fine of $60) - they flag it and 10mins later it's got a clamp on it.

It's absolutely farked.

i've seen this happen a lot latley aswel down footscray rd and at the same time dynan Rd. just under the freeway. they block the right lane and make u pull into the gravel bit. there sometimes a booze bus there too but mainly the sherrifs and epa etc. farkerz.

i got thru fine a couple of times. got waived on. mainly coz my car is not loud.

They set up a booze bus outbound on dandenong rd tonight. At 5pm. Traffic was royally f'd. Unbelievable. Seriously, who is drunk at 5pm on their way home from work on a Wednesday. Waste of resources and money by Vic Pol.

I was being driven to the airport on Monday morning to catch a flight, when I heard on the radio a summary of the weekend fatalities/crashes and that how in Victoria we are 7 up on road death compared to 2011; I then saw in the space of a about 5 k's a booze/drug bus, a couple of speed detector cars and 2 separate police vehicles pulling over drivers.

Clearly the extra deaths are prompting the cops to have more road presence so I'm pretty sure busts like this will be more common leading up to the end of the year.

Mental note to self; ease up on right foot!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...