Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Plz let it be in english ,I just got a 1999 Nissan Gloria Ultima from Japan and everything is in Japanese, giving me headaches to navigate thru most stuff.I am in love with this car,just that part of trying to figure out those buttons and the radio is what is a pain.

  • 2 weeks later...

Hi all, Does anyone have that manual i've been hearing so much about? I have a 2004 cedric and cant figure out these buttons if it was to save my life!!! Can someone send it to me as well as anything else that may be helpful? thank you all in advance! My address is [email protected]

Hi all, Does anyone have that manual i've been hearing so much about? I have a 2004 cedric and cant figure out these buttons if it was to save my life!!! Can someone send it to me as well as anything else that may be helpful? thank you all in advance! My address is [email protected]

email sent.

  • 3 weeks later...
  • 1 month later...

Hey guys, just bought a Y34, and wondering if its possible to get a copy of this manual? [email protected]

Cheers

sending through now.

just a plug:

Myself and some other are collecting lots of info on Y34's on a different forum. Part numbers, aftermarket options, DIY's and model information.

jump on http://www.zeitakuvip.com/forumdisplay.php?9-How-to-s-amp-Tutorials

  • 1 month later...
  • 1 month later...

BurtoN86, thank you for getting this whole manual translation going, you are a legend! Leroy well done for keeping the infor flowing!

I am enjoying my cedric but i dont have a manual for it, and have no way of adjusting stuff! The mpg is quite heavy though, i suspect something is not right perhaps in the tranmission because when I drive in manual it does not go further than gear number 3! Also intermitently the revs are too high but if i pull off, switch off and get it started again then the revs will be back to normal, any ideas as to what could be wrong guys and if there is a quick fix.

I want to replace transmission fluid, does it take normal ATF?

I am so glad to meet other Cedric owners, will you also please send me the English translation to [email protected]

Edited by carvinezw

I am enjoying my cedric but i dont have a manual for it, and have no way of adjusting stuff! The mpg is quite heavy though, i suspect something is not right perhaps in the tranmission because when I drive in manual it does not go further than gear number 3! Also intermitently the revs are too high but if i pull off, switch off and get it started again then the revs will be back to normal, any ideas as to what could be wrong guys and if there is a quick fix.

I want to replace transmission fluid, does it take normal ATF?

I am so glad to meet other Cedric owners, will you also please send me the English translation to [email protected]

If the car is sluggish and doesnt change gears (always in gear 3, manual or auto), and there is an AT Check light on the dash, the gearbox is in limp mode and something is wrong.

Manual control is very unresponsive even when working properly. So are you able to run through any of the gears in manual? does it change in auto-mode? Is the car set in Snow-mode or Fast-mode? (theres a small switch next to the shifter.

for normal 4-speed auto (RE4) a Dex III (3) oil is fine, or Nissan matic-D.

file sent.

Hopefully ill get a chance to re-write the translation document. its pretty poor.

Great see so many people finding the English translation doc for Y34 so useful!

All Y34 owners, jump on zeitakuvip.com for all the helpful info on what these cars require in terms of servicing, oil, parts etc.

It's a great community on there with like minded VIP owners :)

Hi, new member here. I've had a 1999 Y34 Cedric for a couple of years now and I think the time is right to request a copy of the Y34 Manual in English!! If one could be emailed to me at [email protected] I would be eternally grateful. Thanks in anticipation. Oh, and I must say it is great to see that there are many Y34 owners out there. I've only ever seen one since I've had mine. Lloyd.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...