Jump to content
SAU Community

Recommended Posts

Essentially...

* Before entering a roundabout, you must indicate (to give sufficient warning to other road users) if you intend to turn left or right on exiting.

* Just before exiting a roundabout, a driver must indicate with a left indicator one's intention to exit.

* All mobile phones must be placed in a fixed mounting or not be touching the driver in any way.

* Only when parked with one's engine off, can a driver hold a mobile phone in his hand; unless passing it to a passenger.

* Any visual display unit like a GPS must be cradled in a commercially designed fixed mounting; and must not create a blind spot.

Comments?

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Essentially...

* Before entering a roundabout, you must indicate (to give sufficient warning to other road users) if you intend to turn left or right on exiting.

* Just before exiting a roundabout, a driver must indicate with a left indicator one's intention to exit.

How is this different to what the rules are now?

How is this different to what the rules are now?

Previously, the words read, "...when entering..."

On 1/11/12, the words read, "...before entering..."

Penalty = 2 demerit points & $165

Lol.

I won't be laughing when people...

i) don't know their right from their left

ii) continue beyond 360 degrees with the left blinker on all the time

iii) like demented geriatrics forget because they can't adjust

When my memory starts to go, I think I'll turn on my hazards :P

Essentially...

* Before entering a roundabout, you must indicate (to give sufficient warning to other road users) if you intend to turn left or right on exiting.

* Just before exiting a roundabout, a driver must indicate with a left indicator one's intention to exit.

* All mobile phones must be placed in a fixed mounting or not be touching the driver in any way.

* Only when parked with one's engine off, can a driver hold a mobile phone in his hand; unless passing it to a passenger.

* Any visual display unit like a GPS must be cradled in a commercially designed fixed mounting; and must not create a blind spot.

Comments?

It's all the same to me... I thought it was like this for a few years now. I always indicate about 3-5 seconds before I even reach the roundabout and occasionally indicate my exit direction eg. Enter to turn right and indicate left to turn out. Mobile phone in fixed cradle is a new thing to me but I've always had this practice, and like the two last ones, I thought they were the same before too.

I won't be laughing when people...

i) don't know their right from their left

ii) continue beyond 360 degrees with the left blinker on all the time

iii) like demented geriatrics forget because they can't adjust

When my memory starts to go, I think I'll turn on my hazards :P

HAHAHA this made my day. That's if you remember to use hazards...

It's common sense to indicate BEFORE you reach a roundabout (you're supposed to do it at any intersection where you're turning/veering off the normal course of the road), but it's incredible just how uncommon that common sense is... :/

It 'may' fix the common roundabout problem of people entering from the left lane, but continues to turn right causing the car on the right lane that's going straight to stop quickly to avoid an accident.

This always happens at the Kingsford roundabout and it shts me to tears. Nowadays I always go straight in the left lane so grandmas and soccermums won't give me a lovetap on the side of the car.

Meh, doesn't phase me the slightest.

I got other third world problems to worry about.

Like jury duty tomorrow.

omfg /wrist

Just say u naild the defendants daughter on the weekend or something get u out of it quick smart hahahaha, im a little bit pissed off about the mobile phone changes, not for making calls when driving but because i use my smart phone as an MP3 player plugged into my head unit when im driving, how do i change songs now :mad:

* Any visual display unit like a GPS must be cradled in a commercially designed fixed mounting; and must not create a blind spot.

Comments?

THIS. This is a good thing. Lots of retards I have seen stick it in the middle of the screen right in front of them.

But realistically- They'll be more interested in defecting your pod filter than enforcing this.

It 'may' fix the common roundabout problem of people entering from the left lane, but continues to turn right causing the car on the right lane that's going straight to stop quickly to avoid an accident.

This always happens at the Kingsford roundabout and it shts me to tears. Nowadays I always go straight in the left lane so grandmas and soccermums won't give me a lovetap on the side of the car.

The only thing that could possibly fix that roundabout is traffic lights. No one has a clue what they're doing on it and it's just stupid, mostly a 2 lane roundabout with one section of a single lane?! Have had many a near miss with idiots there.

THIS. This is a good thing. Lots of retards I have seen stick it in the middle of the screen right in front of them.

But realistically- They'll be more interested in defecting your pod filter than enforcing this.

I've seen people do this! What.... IDIOTS!! Worse is you can actually see their heads moving side to side trying to look around the gps... Come on... Really??

The only thing that could possibly fix that roundabout is traffic lights. No one has a clue what they're doing on it and it's just stupid, mostly a 2 lane roundabout with one section of a single lane?! Have had many a near miss with idiots there.

I've had so many near misses on James Ruse Drive heading onto the M4 ramp from Parramatta Rd. Like why the f**k would you have two lanes merge into one, and the lanes don't even have those give way lanes where theres arrows pointing out to the lane that continues onwards. Very dangerous as motorists in both lanes have rights to over take each other and theres nothing to govern who goes first.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...