Jump to content
SAU Community

Recommended Posts

hey all, recentley picked up a auto r34 gtt 4 door and im not sure what boost it should be running

mods are

t04e stage 3 turbo

external wastegate

3 1/2 straight thru exhaust turbo back to a nur spec cannon

greddy fmic

spitfire coils

tomei fpr 90 psi

100 oct premium

its running 14 psi at the moment as is is that too much or can it go more every where i have looked has suggested 14 on a stock turbo is the limit but is that the limit for the turbo or the tune

thankyou

Standard ECU?

That will be your issue, I'm suprised you managed to run 14psi through a bigger turbo on the stock ECU and it works.

I dont understand what a T04e stage 3 turbo is...... has it been worked to flow more?

Either way a T04 is much bigger then stock so I would probably stick it on a dyno to check AFR's or wind the boost down to be safe

or get an aftermarket ECU and push it

well ive had it up to 17 - 18 psi before by accident and was surprised that i never hit fuel cut im pretty sure it is a stock engine and ecu apart from them mods turbo specs are

Inlet Diameter: 4"

Outlet Diameter: 3"

Compressor Wheel: .57 Trim

A/R Compressor: .50 A/R

A/R Turbine: .63 A/R

forged compressor wheel

what boost do you suggest for the time being as the nearest dyno is atleast 500k

if you bought the car and it was running 14psi and you cant hear any detonation etc then I guess it will be O.K

I wouldnt wind the boost up put it that way. Remove the passenger kick panel and see if it has an aftermarket ECU or piggyback. Sounds like it must have something to be able to hit those boost levels.

See what you can find

The whole combination of mods sounds weird, maybe the previous owner is telling fibs?

What boost guage are you running and where is it readig its pressure from?

What boost control method?

Its either not not a std ecu or its not hitting those boost levels or its a time bomb...

blitz dual ebc

reading boost from the stock sender

not sure where the turbo is from i was told it is a t3/t4 t04e stage 3 from the owner it doesent look like a ebay special but it could be fpr was set when i got it havent played with it what should that be set on?

had a mate come look at it this morning he does alot with silvias he adjusted the fpr for me its at 55 now

apparentley it has a mine ecu i think he said but he also said that 14 psi on the bigger turbo will be maxing out my injectors

then he said that he didnt think they made a mine ecu compatiable with tiptronic auto

FPR would have been set so high to allow the stock injectors to keep up... Bad idea to turn it down from where it was set. Though it is also a bad idea to keep running it as is regardless.

a genuine 57 trim will flow in the region of 400 to 450 hp

buy some genuine 600cc+ injectors

throw away your fpr (or set it back to 1:1 rising rate)

get a decent fuel pump

get a standalone ecu

put it on the dyno and tune until you start seeing your intake temps blow out (turbo efficiency range exceeded) or you run into some sort of restriction

the auto box may cause you some issues ...

Turn the boost down and drive it gently till its fixed or you could be looking at a new engine.

Take the car to a tuner and get him to have a look at the Mines ecu to see if its tunable (most are not).

If not buy a stock R34 auto ecu and get a Nistune chip put in it. Get some Neo friendly injectors 550 or better.

Look in the tank and see if you have a new fuel pump. If not, buy one and install it if you can or if not add it to the injectors.

You will need a genuine Z32 afm (and plug) if you haven't already got one.

Ask around and find a good tuner (in another town if necessary) and hand him all the bits (or install the bits and tow the car to the tuner) and get it tuned (point out, although he should notice, that the FPR needs adjusting). If nothing has been damaged it should go well.

In the meantime baby the car - no mega boosting, no skids etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...