Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

First skyline was stolen and put up a gutter (financial write-off) 3 months after I bought it.

Second skyline has had many issues after engine mods, as well as being defected for missing front number plate which resulted in engineer's cert being required for mods as well as a myriad of other shit being fixed. $2700 to get it back on the road.

Plenty of details in the engine mod issues to make it seem much worse, but you get the idea.

So ive had the GTR back for... 1 week. And one of the turbos just went. Back in it goes.... May not make SAU nationals now =(

I hope there not the old ceramic turbs and if it is I hope there is no dust/pieces in your block

Touch wood !!

All the Tears, Sweat and Blood I hope mine will be fine for the next 20+ years

Pulls hard like a teenage boy and feels strong as an Ox

If you like we can swap 32's?

though after these turbos are done i hope mine never breaks again.... hope....

In saying that its gotta go in for a front end paint job again as well... SIGH

I've had to replace hubs and bearings (hubs for my car are hard to find) then had to replace the bearings on the other side and steering rack ends, then when that was done my windscreen was smashed, as soon as that was replaced the clutch wore out, now its the power steering that's dying. Not to mention the amount of times my window motor has died, im half way through taking it out and it suddenly comes back to life - though at the moment its dead.

I've had to replace hubs and bearings (hubs for my car are hard to find) then had to replace the bearings on the other side and steering rack ends, then when that was done my windscreen was smashed, as soon as that was replaced the clutch wore out, now its the power steering that's dying. Not to mention the amount of times my window motor has died, im half way through taking it out and it suddenly comes back to life - though at the moment its dead.

Its a curse. has to be.

I guess I have been pretty lucky (touch wood!!). I have owned mine for almost 3 years with only one issue. After about a month of ownership the idler bearing went.

What boost were you making? I intentionally had mine set at 12psi when it was tuned as I cant afford to replace the turbos right now.

I still have the opinion that I've been VERY lucky with my GTR.

Remember a lot of these things you guys are all mentioning is wear and tear on what are getting to be pretty old cars now!

I've had to spend a lot of money on things like suspension and things wearing out.

In terms of breaking besides the block only thing that's ever given way on me was a stock turbo... That was my fault for not leaving well enough alone and letting them boost it to 14psi. Just remember, the more you mess with things and the harder you push them the worse this situation is going to get!!

Remember a lot of these things you guys are all mentioning is wear and tear on what are getting to be pretty old cars now!

Saying that really anything could be considered fair wear and tear. Even a block pushed beyond it's design limit.

Saying that really anything could be considered fair wear and tear. Even a block pushed beyond it's design limit.

True. This is a known fault even on fairly unmodified RBs!

The unlucky part was that it had been inspected like 2 months earlier and was perfect. I fully accept that's what happens when you buy an old car particular if you f**k with it like I have :)

Supra written off while waiting at a give way sign

Loan approved sold my soarer loan cancelled by the bank the next day no car

14k 180 paid off over 11months only worked for 3weeks

Ca18 180 owned for a week replaced the alternator went for a drive blew both radiator hoses overheated cooked the engine

Sr20 180 finally running after wiring problems went drifting spun the bottom end

Bought the skyline has been crashed three times and still not 1 mechanical fault hahaha

Bought the soarer back fuel pump ecu died indicators died front tire went flat

Hahahah all problems probes my fault so don't think they count as bad luck but hey all part of the import life lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...