Jump to content
SAU Community

Recommended Posts

So my understanding of this thread is that this fuel isn't recommended for non daily driven cars?

My cars lucky to be driven once a month sometimes, would this cause the fuel to go off?

If you ran 98 it could go off... I don't know how you got that information out of this thread.

Yes, there is a chance the fuel could absorb water, so make sure you don't stick the hose in the fuel tank. :P

There was mention of fuel absorbing water and rusting injectors in non daily cars so just clarifying

I think you must have read what I wrote. Toshi tuned my car and when I asked about E85 he said its no good for a weekender (or less). I'm just going off what he said to me; water absorb = more chance of knock & potential to rust injectors if the car sits. I don't know anyone who's had that problem and I'm not going to let it worry me at all.

I'm tuning on e85 later this year because everyone seems to love the extra knock protection, lower EGTs, Higher power and it's readily accessible for me so why not!

i odnt no about E85 going off - i asked the same thing and he said he has a rally car that lives at the work shop and comes out jumps on the dyno for a check every 6 months or so or before meets and the e85 levels never drop and is still running after 5+ years of competing - - thats his experience anyway - i have just been told not to let it sit in plastic containers

I think you must have read what I wrote. Toshi tuned my car and when I asked about E85 he said its no good for a weekender (or less). I'm just going off what he said to me; water absorb = more chance of knock & potential to rust injectors if the car sits. I don't know anyone who's had that problem and I'm not going to let it worry me at all.

I'm tuning on e85 later this year because everyone seems to love the extra knock protection, lower EGTs, Higher power and it's readily accessible for me so why not!

My customer used E85 and he did not drive 2weeks then his car start engine knock (He could not hear knock but his ecu is power fc so he can see how many knocks).

He refill E85 then stop engine knock.

I think fuel pump and injecter is not problem.

I've had zero issues. If the engine is knocking on ethanol something is very wrong, mine will cruise on 20:1 without ping. Going by the PFC for knock doesn't sound very accurate...

Unless it was a bad batch of ethanol? I usually buy from high turnover servo's but I have never had an issue with this either. (and I have filled many hundreds of times)

Depends where you buy your e85 from

I've heard of a few united servos now having bad batches of fuel where the e85 has dissolved everything in the servo tank coming out like rust water blocking pumps and injectors to the point where the car won run

Caltex eflex haven't had issues ever

Is that what you run micko?

Sounds like they never upgraded the tank at the servo then, which is very illegal. Caltex would have the same issue with the old steel tanks, but they were obviously a lot more proactive with their rollout.

Yes mate been on eflex for ages with zero issues :)

Depends where you buy your e85 from

I've heard of a few united servos now having bad batches of fuel where the e85 has dissolved everything in the servo tank coming out like rust water blocking pumps and injectors to the point where the car won run

Caltex eflex haven't had issues ever

Is that what you run micko?

I was reading some yanky info on e85 the other day, and it mentioned that when installing fuel pumps in tank to insure that the terminals on the pumps and line had a non conductive cover or coating over them, because e85 is a conductive fuel and can short out in the tank and create fire.

Is that true I've never heard of anything like it before?

Exactly! Even if it did you got more power to drive away faster to extinguish flames :D

There is no oxygen in the tank, so no chance of a fire. Science! Anyway, my car exploding is of no concern to me if it goes faster :)

I was reading some yanky info on e85 the other day, and it mentioned that when installing fuel pumps in tank to insure that the terminals on the pumps and line had a non conductive cover or coating over them, because e85 is a conductive fuel and can short out in the tank and create fire.

Is that true I've never heard of anything like it before?

Lol. Mythbuster that shit. :P

The only way it becomes conductive afaik is when water is added. Probably best to just use the sealed Walbro 460L e85 pump to be safe.

I would think after 5 years on ethanol in my daily I would have dispelled most of the myths surrounding it, my car has not caught fire ever, the Walbro 255's are still running strong, and the fuel tank hasn't rusted away. I have also never cleaned the fuel filter... ;)

I was reading some yanky info on e85 the other day, and it mentioned that when installing fuel pumps in tank to insure that the terminals on the pumps and line had a non conductive cover or coating over them, because e85 is a conductive fuel and can short out in the tank and create fire.

Is that true I've never heard of anything like it before?

There is no oxygen in the tank, so no chance of a fire. Science! Anyway, my car exploding is of no concern to me if it goes faster :)

I am pretty sure there is oxygen present during installation of the pump.

I say plausible.

There will be air in the tank above the fuel but the vapour generally isn't as flammable in an enclosed space as people sometimes think .

The worry would be what was causing arcing across the electrical connections that may be exposed inside the fuel tank .

You'd think a pump drawing 18-20 amps would be more likely to do this than one drawing 8.6 amps .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...