Jump to content
SAU Community

R32 Ute conversion

hayai32
 Share

Recommended Posts

funkymonkey Grand Master

funkymonkey

Posted
Posted

you'd be surprised what you can do with a 4 door semi chop... apparently its VERY easy to do if you have a 4 door... hmmm might try to talk a certain $2 4 door R32 owner into it :P

Nats_r32a.jpg

Nats_r32b.jpg

And yes you get to keep the 4 door tail lights.

funkymonkey Grand Master

funkymonkey

Posted
Posted

btw NATS = Nipon Automotive College... where you learn to race, maintain, design and build cars. The pics above and the ones they showed at autosalon are the works of all their students... if you thought their skylines were different wait till you see what they do with the other cars..

funkymonkey Grand Master

funkymonkey

Posted
Posted

Also you'll note that the ute's back windoe is the stock R32 rear window, simply moved up. According to the students who built the car, they've cut the rear passenger section and seats out of the car and moved everything else forward. The rear doors were cut and welded into place, as was the bottom of the boot. The rest was then finished off with FRP (fibre reinforced plastic, or fibreglass as we know it) and bog sanded and then painted.

Oh and in case you're wondering the taillights of the oldschool skyline is in actual fact supra lights.

  • 2 years later...
4DoorWhore Community Regular

4DoorWhore

Posted
Posted (edited)

280685036.jpg

All i know is it was a former 4-door, has a Toyota truck bed in it... made by Nats OSTY

oh actually i found some more stuff....

http://www.youtube.com/watch?v=fWDg06O_fhQ

ok i guess, my question is what are your thoughts...

"sorry if its a repost"

Edited by 4DoorWhore

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...