Jump to content
SAU Community

Recommended Posts

Hi all,

I've done a bit of searching but can't find much that is R34 specific with diffs. Apologies if something similar has been covered before...

I've recently started having troubles with my diff and have been looking for what replacement options there are.

I am going to change my diff oil first just to rule out that, I don't know when it was last changed and the car has 150k kms on it so I'm hoping there is nothing major wrong and this will help. But looking at the worst case, I am thinking of getting either a 1.5 way or a 2 way.

Can anyone point in the right direction or where to get some pricing and good places to buy from? I will most likely buy online, and have fitted professionally locally.

The main brands I see around are Kaaz, Nismo and OS Giken. What would the best brand be to look at? The car is a weekend warrior (that I'm hoping to take to the track eventually), so I'm not concerned about daily annoyances that a 2 way diff may give me. But I'm open to pros/cons about which way to go.

Thanks for all help :)

Tim

Link to comment
https://www.sau.com.au/forums/topic/414217-r34-gtt-diff/
Share on other sites

Not heaps. 2 way provides roughly the same LSD action under decel as it does on accel. 1.5 way less so. This will result in more trailing throttle/turn in understeer, but the transition from trailing to accel will be more positive. This is more predictable, hence why better for track work. Less good for road simply because more annoying with the bumping and shuddering and so on.

Link to comment
https://www.sau.com.au/forums/topic/414217-r34-gtt-diff/#findComment-6636500
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...