Jump to content
SAU Community

Recommended Posts

hey guys, was driving the stag yesterday and the motor just died so i pulled over and attempted to start the car again but no love. I know its not the battery as all lights are on and car just wont crank over. Could the coils have lost their spark or it couldnt happen to all of them all at once? If its the crank angle sensor what symptoms are shown?

Car is a c34 auto with nistune, ss2 turbo and other basic mods. Engine light was showing but always comes on when its hot or at night but speedo also dies after a while its left in drive. When that happens i chuck it in tip tronic and the light disappears and speedo comes back on.

What other gremlins may have caused this?

Link to comment
https://www.sau.com.au/forums/topic/414856-stagea-wont-turn-over/
Share on other sites

What do you mean by "won't crank over"? Nothing happens when you turn the key? Can you hear the solenoid click when you turn the key? Check the battery terminals for tightness and cleanlines. Check the earth strap. Check the lead down to the starter motor. Use a test light to check the main fuses in the engine bay. Ignition switches sometimes pack up. Won't be the coils or CAS if the engine won't even turn over.

Yeah ur battery may have a dead or dry cell, this will cause it to have enough power to run ur lights stereo wipers ect but not enough to start it! I had a simmilar problem recently with my wifes 2010 fiesta, took the battery to battery world had it tested, bought a new one put it in and problem solved

+1 for battery connections.

I had a similar issue. Drive to the shops, all good. Came out and went to start the car, nothing. Had all dash lights, stereo, wipers, the works but could only get a click from the engine. After doing some impressive carpark machanics and removing the starter motor to check it wasn't seized or something stupid then fitting it again managed to get it started by short starting it with a jumper lead. Straight to an auto elec who proceeded to do the the most basic thing, check the simple shit first!! Turned out it was I dodgy connection where the terminal clamps onto the cable.

Check the battery connections or try a new battery.

lol, we tried a new battery and same thing still wouldnt start. Now we are looking for a auto electrician to look over the car but as soon as people hear that its a stagea nobody wants a piece of it. Anyone know of a mobile auto electrician based in sydney that knows a thing about stageas?

Ok let's get this clear, does the engine wind over & not start or won't wind over ?????

If it won't wind over can u crank it over by hand? It may have a broken timing belt n bent valves

Edited by GTR260

The biggest issue is - Is this now a new problem ontop of check engine light and speedo dropping off, or somehow a part of it.

When did the CEL and speedo issue start to occur ? After fixing something/replacing something ? Nistune ?

And with no disrespect, lets be very clear on what happens when you start.

Red lights on ACC - YES/NO

Fuel Pump prime on IGN - YES/NO

Starter motor click when starting - YES/NO

Engine rotates when starting - YES/NO

When starting it's misfiring/spluttering and won't run - YES/NO

Diesel was substituted for Petrol - YES/NO

engine winds over but will not start.

Lol diesel. Actually the engine light problem came on 5 hours after i bought the car which is over 2 years ago and comes and goes here and there. When i did get the nistune toshi told me i had a faulty speedo sensor and my 02 sensor was basically dead. Apart from that the car has never given me any issues.

oh and yes red lights on acc fuel pump primes on ign, starter motor clicks when trying to start

ok, so the engine does rotate when starting, but doesn't fire up.

Do a basic spark test

Remove #1 coil pack from engine and connect to a spark plug (leave coil pack wires connected).

Rest the spark plug on an earthed part of car (engine). Attempt to start the car and have a friend look at spark plug for spark. User camera if no friend to be found.

The link below will have pics/info on what to remove to get to spark plugs in case you didn't already know ! Pics are further down in a jumbled order.

http://www.skylinesaustralia.com/forums/topic/42819-rb25det-changing-the-spark-plugs/

^^ starter clicks?? Thats a current delivery issue. At a first guess with a problem like this....

AFM? They have been known to shut you down if theres a bad connection. If you dose it you can stall / break it.

My advice is buy a multimeter and get some data.

Nothing yet, had 5 different auto electricians come to my mechanic and none of them know, dont wanna know since its an import. Been to busy at work to chase this up christmas rush is killing us. Only update now is engine light wont turn on fuel tank doesnt prime so no spark at all. Gonna do a search now for stagea electric info and english version for the fuse box.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...