Jump to content
SAU Community

Recommended Posts

Me and V8cat have already ordered and received them but the discount wasn't that significant (100 GBP) considering how much you end up spending with shipping and taxes.

But the brakes do look amazing and should be fitting them on shortly once I get my PMU club racers.

If you received 100 GBP from discounted price, it means 1400 GBP discount from retail price.

I went ahead with the order because even after postage, taxes and discounts it was still a lot cheaper than sourcing them locally. All depends on exchange rate as well.

Hey mate if possible could PM what you payed in total for the kit

Thanks

A word of warning, those standard issue pads are not very good when pushing the car hard at all. I took my thing up Springwood road, out near Richmond in NSW (basiclaly a 4 km sprint up a hill. 1st and second gear, I may have snatched 3rd once) and you could feel the pads not liking it. Got a tad spongy.

A word of warning, those standard issue pads are not very good when pushing the car hard at all. I took my thing up Springwood road, out near Richmond in NSW (basiclaly a 4 km sprint up a hill. 1st and second gear, I may have snatched 3rd once) and you could feel the pads not liking it. Got a tad spongy.

Yeah, I found that too, I still haven't fitted my PMU Club Racers yet.....They should make the car stop on a dime!

Yeah, I found that too, I still haven't fitted my PMU Club Racers yet.....They should make the car stop on a dime!

I've heard good things about the Pagid pads. Black and yellows or something.

Anyone know if Endless make a pad in their CC-RG compound that will fit. I had those on standard brembo setup and they were nothing short of awesome!

A word of warning, those standard issue pads are not very good when pushing the car hard at all. I took my thing up Springwood road, out near Richmond in NSW (basiclaly a 4 km sprint up a hill. 1st and second gear, I may have snatched 3rd once) and you could feel the pads not liking it. Got a tad spongy.

Alcon kits are road legal in UK so they come with ferodo ds performance pads. They are ok for street use but not for track. I found same information in manual included in box with brakes. Yellow pagid RS29 are the best option for alcons imo. They work from cold, don't squeak, and are very "friendly" for discs. RS19 are not available for alcon 6 / 4 pistons. I checked with jdl last month.

RS29 is the "yellow" Pagid Paul that people speak of... Pagid make two "yellow" and the RS-19 is the lower spec of the two :)

Yeah, Jack said he was running these when he used this kit. He was happy with them.

Hence why I'm not even bothering with the DS performance pads and was recommended either club racers or Pagid Rs29.

Have a read, explains some common brand pads for either street or track.

http://motorsportbrakes.com.au/wp-content/uploads/2013/04/3-Pads.pdf

I never ran out of brakes with DS2500 on the street with a 356mm rotor.

Even on a 15min hills run... And I'm not one to take it easy

ahhhh....that only say's your no good at braking!

Grow some hairy ones me thinks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...