Jump to content
SAU Community

Recommended Posts

I'm having a problem with my r33 gtst was running fine then I installed 750cc injectors, 044 external pump, walbro 255 intank, microtech lt16c plug and play, removed all the idle control off the manifold, eboost 2 and now the car won't turn off if I turn the key off or even take it out the car will still run then if I stall the engine the reds are still on the only way to get them off is to unplug the computer the car has an alarm but doesn't work (well I can't work the stupid thing) and it also had a hks turbo timer. my plan is to remove the alarm and turbo timer and see what happens. or could it be a fult with the computer it's brand new so ill ring the bloke I got it off tomorrow just wanted to see if anyone can help thanks

Link to comment
https://www.sau.com.au/forums/topic/415328-need-help-car-wont-turn-off/
Share on other sites

I'm having a problem with my r33 gtst was running fine then I installed 750cc injectors, 044 external pump, walbro 255 intank, microtech lt16c plug and play, removed all the idle control off the manifold, eboost 2 and now the car won't turn off if I turn the key off or even take it out the car will still run then if I stall the engine the reds are still on the only way to get them off is to unplug the computer the car has an alarm but doesn't work (well I can't work the stupid thing) and it also had a hks turbo timer. my plan is to remove the alarm and turbo timer and see what happens. or could it be a fult with the computer it's brand new so ill ring the bloke I got it off tomorrow just wanted to see if anyone can help thanks

id be thinking the turbo timer first..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
×
×
  • Create New...