Jump to content
SAU Community

Recommended Posts

Hi Jimmy - as you know I have but I went the new outer window trim route.

I'd go have a look at either Spotlight and look for something similar in a material.

It's like a white shag small material.

Remove the existing bushes (both). - Use a hand held razor blade and maybe some turps to remove the glue.

Glue the new bushes to the plastic backing and let dry

Re-Install.

Both sides :) (bout 30mins effort)

Perhaps Supercheap or Bunnings may have something similar.

It's really just a 4-5mm bushy length and around 3cm x 1.5

Cheap as cheaps way to replace.

and remove and rinse every 3 months or so to stop the dust scratches re-occurring on the glass

(fairly certain you cant buy just that piece and clip in :( )

Edit: PS new external window trim farkers aren't cheap)

Edited by Sinista32

Hmm - might have been around $115 each I think when I bought mine. But postage is very exy due to length.

all air postage out of Japan is daylight robbery.....SAL less so and sea cheaper still.

Paid $90 bux freight recently for an RH9 alternator. Half the size of a shoe box !

Best idea is to compile a list and save for it all. Then buy and use Sea as delivery method (6-8weeks)

My issue is I cant wait so it goes DHL. RHD & Nengun are my favourite Jap shops.

Some costs - Rear window Trim (only) is $330. Qtr windows about $220 ea.

OEM Windscreen $1700, Dash $1100ish (NAL). OEM GTR Steering wheel around $1k deliverd. C-pillars $140ea

Very True indeed Kat - It is good checking Nissan spare parts first and they don't seem to fluctuate with exchange rates if the parts are in country.

My issue with calling them previously is there not real helpful and never call back. (but I don't have bewbs :/ ) They can be a lot more expensive too and sometimes cant get what you see on RHD/Nengun.

But now having an insider the service is brilliant :thumbsup:

Must admit I picked up mine even cheaper still off someone who bought new, with horn button, and didn't unpack it. Win

I actually lost my insider so I may hit you up at some point knowing that!! :D

I do buy most on RHD admittedly.

Floormats arrived for the GTR on Thurs, they're better than the looked in the pics. Now got to get them to carlovers or somewhere with a steam cleaner for some love!

Door trim (as in inner door card to be specific)

http://www.amayama.com/search/?q=80900-05U00

http://www.amayama.com/search/?q=80901-05U00

There's the parts for both left and right. Label on box has them as "Finisher-Door"

Door trim (as in inner door card to be specific)

http://www.amayama.com/search/?q=80900-05U00

http://www.amayama.com/search/?q=80901-05U00

There's the parts for both left and right. Label on box has them as "Finisher-Door"

Yep, all of their stuff is NEW OEM :)

By door trim, I meant rubber strip for outside of window, confusing myself haha

Edited by Scar

:excl: HAIL ALERT! :excl:

Small hailstones in west belco, so its heading your way.

Not damaging yet, but can easy get bigger without any warning.

Yes had small hail here earlier (bruce) Edited by Scar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...