Jump to content
SAU Community

Recommended Posts

Hey all,

Wrecking an r33 series 2, 2 door, turbo, manual. It has had a major collision in the rear end, so most of the rear is completely screwed. i have made a rough list of the parts and prices i want, if there is something you want and its not on the list just ask. The motor, gearbox, tailshaft, loom, ecu, steering rack and front control arms are all mine. Everything else is for sale pretty much. The fmic is sold already and the lights and front bar are gone too.

(Driveline/engine)

rb25 turbo (good cond) 250

Rb25 manifold 50

Rear subframe 100

Diff 200

Driveshafts 50

HICAS 50

Power steering bottle 20

Brake master cylinder 50

Sway bars 20 each

Front wiper motor 20

Rear Wiper Motor 20

Steering column 20

Manual Conversion parts(pedals, etc) 50

300zx pair of wheels, rims are good, f**ked tires $50

s15 pair of wheels, f**ked tires and many scratches $50

Standard r33 suspension $50

(Body parts) WHITE

Drivers door mint 150

Bonnet (1 small ding) 150

Front Guards mint 150 a pair

Type m skirts (front piece inside the wheel arch on the pasenger skirt is cracked and missing a piece out of it, still looks good from the side) 100

(DASH PARTS)

turbo cluster with 170,xxx 50

Dash good condition 150

Glove box 20

Center console missing manual shifter insert 50

Heater core 20

Aircon core 50

Heater fan 20

(INTERIOR)

Front seats (r33 4 door) 50

Rear Seat (r33 4 door) 50

Indicator/wiper switch assembly 50

Handbrake lever 20

Rear trims 50

Seat belts set of 4 50

Carpet fairly good condition 50

Roof lining 40

Skyline Skuff plates, both sides 35

Door seals 25 each

Boot seal 25

Rear ¼ trims 25 each

Rear1/4 window surrounds 50 each

A pillar Trims 20 each

B pillar trims 20 each

Rear Vision Mirror 20 each

(ODDS AND ENDS)

Fuel tank 30

Fuel pump 30

Windscreen 50

Rear window 50

wipers 15

Engine Mounts 50

Handbrake assembly & cables 50

Guard liners 75 for all 4

THIS PRICE LIST I GOT OFF SOMEONE ELSE ON HERE AND ADJUSTED THE PRICES HEAVILY BECAUSE I THOUGHT THE PRICES WERE WAY TO MUCH, THAT SAID, SOME PRICES ARE SLIGHTLY NEGOTIABLE, AND IF YOU BUY MORE THAN A FEW PARTS I WILL PROBABLY DISCOUNT IT.

PLEASE CONTACT ME ON MY MOBILE LISTED BELOW AS ITS EASIER THAN f**kING AROUND ON HERE, THANKS.

Pic: No point putting up pics as we all know what an r33 looks like, can get close ups of certain parts if you want.

Location: Laverton North, will ship some parts at buyers expense.

Contact: 0407 056 817

Edited by Jack_Sky
Link to comment
https://www.sau.com.au/forums/topic/415708-vic-wrecking-r33/
Share on other sites

  • 2 weeks later...

all those parts are gone guys.....

Albie please READ the post before u ask questions about parts....

DRASTICALLY REDUCED PRICE DROPS ON ALL ITEMS I STILL HAVE! COME GET THESE PARTS. WILL THROW PEOPLE STUFF FOR FREE EVEN IF YOU BUY OTHER PARTS. IF NONE OF THIS STUFF GOES IN THE NEXT 3 WEEKS IT WILL BE CRUSHED WITH THE SHELL....

rb25 turbo (good cond) 100

Rb25 manifold 25

Rear subframe 25

Diff 150

Driveshafts 50

Hicas $25

Power steering bottle 20

Sway bars 20 each

Front wiper motor 20

Rear Wiper Motor 20

Manual Conversion parts(pedals, etc) 50

300zx pair of wheels, rims are good, f**ked tires $50

s15 pair of wheels, f**ked tires and many scratches $50

(Body parts) WHITE

Drivers door mint 100

Front Guards mint 100 a pair

Type m skirts (front piece inside the wheel arch on the pasenger skirt is cracked and missing a piece out of it, still looks good from the side) 80

(DASH PARTS)

turbo cluster with 170,xxx 50

Dash good condition 80

Glove box 20

Heater core 20

Aircon core 20

Heater fan 10

(INTERIOR)

Rear Seat (r33 4 door) 20

Indicator/wiper switch assembly 20

Carpet fairly good condition 20

Skyline Skuff plates, both sides 20

Door seals 10 each

Boot seal 10

Rear Vision Mirror 20

(ODDS AND ENDS)

Windscreen 25

Rear window 25

Engine Mounts 25

Guard liners 50 for all 4

  • 4 weeks later...

Still have these parts left over and maybe a few other little things.. taking the car to scrap this week probably so let me know if u need anything. nego on the prices listed. Rear subframe

HICAS

Power steering bottle

Sway bars

Front wiper motor

Rear Wiper Motor

Steering column

Radiator

(Body parts) white

Drivers door mint

Guards mint

Type m skirts(chunk missing on front wheel arch, need repair)

Type m pods(fiberglass, slight damage, need repair on bottom)

(DASH PARTS)

turbo cluster with 170,xxx

Dash good condition

Glove box

Heater core

Aircon core

Heater fan

(INTERIOR

Indicator/wiper switch assembly

Carpet fairly good condition

(OTHER)

Fuel tank

Fuel pump

Windscreen

Rear window

wipers

Engine Mounts

  • 2 weeks later...
  • 4 weeks later...

STILL HAVE....

Radiator $75
Guards mint $100
Type m skirts(chunk missing on front wheel arch, need repair) $80
Type m pods(fiberglass, slight damage, need repair on bottom)
$20

Engine mounts $25

guard liners $50

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...