Jump to content
SAU Community

Recommended Posts

Hey all,

I finally decided I would create a thread for my 1989 R32 GTR. Now a bit of a warning, there are a few photos here so i will have to split this over a few posts. The rest of the photos are on my photobucket (assuming my internet fixes itself!)

Before the GTR i had had a R32 gts-t which was my 1st introduction to imports. I loved it, then made the silly mistake of putting a rb25 into it.

gtst_zpsd3e84569.jpg

Whilst it went really well, it was unreliable and a pain to drive, so long story short i swapped it for an s13 with rb20, coilovers and a few other bits and pieces.

s13_zps9c21fdf7.jpg

This was my daily for a little while until i heard of a cheap gtr for sale. after lusting after one for so long i was so happy to have found one for cheap and didnt even have to travel to get it. I went and saw the bloke selling it to have a look. I was blown away with how good it looked even with tacky (in my opinion) chrome bits and pieces.

1_zpsb7f84d57.jpg

So i had to ask the question "why is it so cheap?". The answer was simple, it had what the owner thought was a rod knock. When he started it there was a pretty bad noise, but came from the head, not the bottom end.

2_zpsb3c42469.jpg

So knowing there was something that wasnt fun going on, i thanked the bloke, and told him i would keep in touch. After looking online at motors and stuff i decided that i could yank the motor and replace it with another standard one so i called the bloke back and said id take it.

3_zps57f9ae17.jpg

After getting the car home i decided i would investigate the noise before i purchased another motor.

4_zps05a9213f.jpg

Anyway to cut a long story short and speed this up a little the oil was putrid and really thick so i changed it a few times to get all the old stuff out. I noticed after the first oil change the noise was quieter and after the 2nd one was gone completely. Win! So i did some investiagtion and it was only a slightly sticky lifter from having putrid oil. Anyway first drive on a permit, bam! rear turbo gooooone :(. So whilst being pretty devo and realising it was going to be a massive sh!t fight to change the turbo i reefed them off and bought a dirty single manifold.

5_zpsdcb4a6b9.jpg

I then got a 2nd hand turbo off a mate which is aparently a trust t67r. So my christmas 2011 was spent removing old turbos and installing the new one. Also got a 100mm tube and fin cooler whilst i had the front end off it.

6_zps00485a32.jpg

7_zps04745b15.jpg

8_zpsa227a178.jpg

9_zps8cc227cd.jpg

10_zpsa472c285.jpg

After installing all this stuff (tomei reg and a few other little bits and pieces went in at the same time) i had the hard decision, do i make/find a greddy style intake that let me use the standard mafs and run a power FC? Nah. Did some research and came across the haltech range of products. Just a quick google showed me that it was way more than i currently needed, but i had plans to make a bit more power and didnt want to shell out for bigger afms later. Not to mention the cool gadgets the haltech can have added to it. So i forked out the 1800 they wanted, Merry christmas to me!

11_zps83366589.jpg

13_zpsa5d7072d.jpg

12_zps39a25bbe.jpg

14_zps0c214524.jpg

15_zpsa8b452b6.jpg

Installed that at the same time as some 720cc injectors and a hks fuel rail. So as i was waiting for my tuner to have some time to tune it i decided i would get the front and rear bars resprayed by a mate who is a painter. one thing led to another and i was striping the car for a respray. Fark. Anyway i pulled it apart and prepped it all myself. Two days before it was due to roll into the booth it decided not to start. Great. no spark.

I thought the igniter had crapped itself. Borrowed another one and no dice still. Scratching my head as to why there was only a weak spark i changed coilpacks to spares that i knew worked. Still only weak spark. I decided that i had just got 2 bad igniters and re-wired the coilpack soom to remove the igniter and use rb25 s2 coils just like i had on my old r32. After all this trouble still nothing. so i had a long hard think about it and decided to put the jerrycan and lighter away and check everthing. Ecu unplugged and plugged back in, nothing. changed to std ecu, nothing. haltech back in still nothing. unplugged the two green relays next to the ecu and switched them. Coughed an spluttered into life!! Dunno why they werent working but cleaned all the contacts and it started again. Pretty random problem to have but whatever it was fixed!

Whilst this was going on my painter had switched shops and couldnt use the booth at his new shop for a while. FUUUUUUUUUUUUUUU. So i just started buying bits and pieces for the fuel system and suspension. Finally the time came to get it in and done.

Gtrboot_zps7c9e2fa1.jpg

16_zps804f6c6b.jpg

17_zps2b5e9c31.jpg

It got primered then my "mate" that i was paying to do it didnt want to spend anytime on it even though i had done all the prepwork ready for basecoat and paid him. lesson learnt. Some 2 months later it got painted. Finally!!! Test fitted my wheels just before the basecoat went on to ensure i had rolled the guards enough.

19_zps4d647909.jpg

20_zpsb90683f0.jpg

Was super happy that it was finally done and ready to be put back together.

21_zps562b9cf8.jpg

22_zps31eb17ad.jpg

23_zps54ad7414.jpg

Link to comment
https://www.sau.com.au/forums/topic/416149-k_ds-1989-r32-gtr-build/
Share on other sites

Got it mostly back together and sent it to get tuned.

24_zpsf52f760c.jpg

25_zps4d8d9b63.jpg

26_zps55c5cfc8.jpg

27_zps553c38fa.jpg

The next day i got a voicemail from the tuner asking if i could please call him back ( i wasnt expecting it back for another few days :/). Fearing it had thrown a rod or bottom ended i called him back fearing the worst. Luckily it was just my stupid low slung exhaust + rubbish suspension meaning that when they strapped it the exhaust would hit the roller. Ooops. took it home on friday night and put coilovers and cams in at the same time over the weekend. Took it back on the monday and got told off for pulling the CAS off and putting it back on slightly out :P. Got it tuned on pump fuel (injectors werent big enough for e85 DOH!!). Made more than i expected, 313rwkw at gatespring pressure (15psi). I was stoked and told him not to use the controller to try preserve the bottom end. Driving it home for the 1st time in a year was the best feeling, but being double demerits decided to cruise safely home license intact. Anyway this is how it sits now, still with its 4x4 ride height from the dyno. Currently waiting for my ID2000s to turn up, and some more cash dollar to start building a forged bottom end.

28_zps2d97d595.jpg

29_zps573e93b5.jpg

30_zps0ddde754.jpg

31_zps71515c98.jpg

Thanks for reading, sorry its so long, i forgot the dramas i had with it! Please let me know what you think :)

Thanks goes out to Jason @ Japspec Garage, John @ Trojan Motorsport, Rob & Vic @ Aussie Automotive, and numerous other people that i have forgotten :)

As it stands i have done all the work on this car aside from the tune, some of the respray and making the dump pipe. Spec list is currently as follows:

12/89 R32 GTR

Custom HOK galaxy grey respray.

N1 bonnet and boot lips.

Koya CR tek 18x9.5 +22

Advan neova 265/40/18

Standard (as far as i am aware) rb26

Tomei type B poncams

Ssr cam gears

Supposidly trust t67r

Xspower stainless manifold

Tial 38mm Mvr gate

Standard radiator with a thermofan

100mm tube and fin cooler (cant remember brand)

3"mild steel dump

Stainless decat pipe

3.5 / 4" exhaust with apexi cannon

HKS fuel rail

Denso 720cc injectors

Tomei FPR

Speedflow Fittings and Parker pushlock hose

1/2" moroso alloy fuel feed line

Mallory Fuel filter

2x bosch 044 pumps

walbro intank pump

2.5ltr surge tank

Haltech Flex fuel sensor

Haltech platinum pro plugin ECu

Haltech wideband 02 controller

Haltech Input/Output expander

Nismo gear knob

Autometer boost gauge

Shitty drift wheel

Bridgestone NPG coilovers

Whiteline front strutbrace

SRI solid supframe collars

Hicas lock bar

Hardrace adjustable rear camber and traction arms

  • Like 1

Custom HOK galaxy grey respray.

Looks really good slightly more gold/copper tinge.

Great looking GTR man.

Thanks mate. Will get someone who knows what they are doing with a camera to take some proper photos as in the sun its nearly a bronze!

Good work, seen in the flesh recently.

Might be worth checking/replacing crank collar and oil pump if the engine is indeed unopend and stock.

Hate to see you having to rebuild the engine.

Your now pushing over 300kws so it will come sooner rather than later if your not careful.

Hate to be a worry wart but it happend to me.

Good work, seen in the flesh recently.

Might be worth checking/replacing crank collar and oil pump if the engine is indeed unopend and stock.

Hate to see you having to rebuild the engine.

Your now pushing over 300kws so it will come sooner rather than later if your not careful.

Hate to be a worry wart but it happend to me.

Cheers Richard,

I was going to do that, but im starting to order stuff for a new bottom end now, and dont plan on driving it much till thats done.

Installing the collars requires removing the crank doesnt it?

Love the custom colour, really suits it

Set of N1 headlights in that would look good

Just don't be tempted to turn the boost up on that turbo with stock motor, i leaned my old R out years ago with standard turbos and popped an engine, could just imagine what damage that beast could do ;)

Its hard not to, so i pulled the controller out the other day to resist temptation!

N1 headlights or rods hmmmmmm. I think rods might be a better investment at the moment, although i do agree the n1's look better and you can actually see with them unlike these rubbish projectors.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...