Jump to content
SAU Community

Recommended Posts

Really? Pm where from was looking at them before however they were either expensive or had a long wait on them.

I have done the same recently too, but i dont know what im doing with it yet.

Nengun. :)

But there is a 2 week lead time on top of delivery time.

I still don't know what I'm doing...

niiice, with all sensors n sheet?

Yup!

nengun looks the cheapest Nick

http://www.nengun.com/greddy/multi-d-a-gauges

That.

Who on here is good with setting up boost on Greddy Profec B Spec II's. I have been trying but ended up confusing the f**k out of myself and turned it off.

Anyone that currently has one running? Also if you could supply me with the settings that would be awesome

Ive got a brand new one for sale Krish but unfortunately I never got around to installing it so can't help bud.

It's a popular unit so there should be plenty of peeps that have used them.

Pretty sure the operating manual is avail online too bud.

Yeah its an awesome unit. I have used it for years and it always works well but in the past they have been tuned when I was getting the car tuned. Now it just has a stock turbo so have to re tune it to bring the boot level down a bit. I found a few tips and hints so will try that on the weekend.

woah def not worth that much for a kit car.

Expert opinion? Once you start ticking the options on those RCR kits, they get pretty f**king expensive. Add on drivetrain, shipping, local engineering..

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...