Jump to content
SAU Community

Recommended Posts

Reckon you could get 20% weight out of something that is already bare bones at 690kg? Always going to be limited by the chassis without doing massive work on it. Might as well be a sports sedan.

Reckon you could get 20% weight out of something that is already bare bones at 690kg? Always going to be limited by the chassis without doing massive work on it. Might as well be a sports sedan.

You'd never make minimum weight, but at least you aren't going to be restricted by that rule... The Japs get the TSCup version of the later, bigger, heavier B310 Sunny down to 670kg racing weight with FRP or carbon panels, bumpers and acrylic windows, And that starts life at something over 850kg. Still with no obvious fat on its bones. Pro allows you to cut out the boot floor and stuff as well.

As for the other point, what Pro Class car doesn't need massive work on its chassis? Except perhaps Cyber Evo... But guess what the secret to their speed was... aside from the aero and good driver that all the contenders had.

You can make good power from the original A12 or bigger A14-A15 with a turbo. They're a tough little unit, with plenty of aftermarket support. And one man can lift a complete engine! They're super compact too - get that 2" behind the firewall and V-mount the rad/intercooler as far back as possible.

You'd stay light with driveline and be prepared to break a few bits occassionally, rather than over-engineer it.

MX5 suspension could be the way to go - it works and its light. Do the NZ racecar trick of dropping the body down over the floorpan - sort of like a channelled rod, to get down to the 50mm permitted ride height.

As Roy says 400bhp and 700kg is not beyond the realms of possibility. And you'd have the smallest frontal area of any competitor other than a Lotus. And would be one of the cheapest Pro cars to build. So it wouldn't matter so much when they change all the rules again the followig year! lol

Edited by hrd-hr30
  • 1 month later...

Car is in the process of getting put back together. Hopefully be out next month to iron out all the bugs ;)

Have you done EC before on street radials? I remember getting down to 44s in my 33 with 350kw a couple of years ago... hope you can represent so its not a EVO fest!

I have, but no confirmation yet.

Also wanting to get into open, but dont know if they'll want a dirty 31 in their event :)

Who has expessed their interest and in what class? Anyone receive confirmation yet?.....hoping to represent in open!
:cheers:

Who has expessed their interest and in what class? Anyone receive confirmation yet?.....hoping to represent in open!

:cheers:

I'm sitting this one out. Last year broke my 'modest' budget and this year I am focusing on other things. Still hoping to get out to a few club events and SAU nats later in the year. The to-do list is growing with the ideas I have for the car but they'll have to wait till next year.

I'll still be there but as a spectator this time. I'll come say hi Steve.

I'm sitting this one out. Last year broke my 'modest' budget and this year I am focusing on other things. Still hoping to get out to a few club events and SAU nats later in the year. The to-do list is growing with the ideas I have for the car but they'll have to wait till next year.

I'll still be there but as a spectator this time. I'll come say hi Steve.

Nooooo Russ..... loved following your progress through the high and lows over the years ;)

Richo, make sure you kick my mates supra from gorilla industries :P

Richo, make sure you kick my mates supra from gorilla industries :P

Haha!

What's the latest on big red?

Don't think it'll make an appearance this year. Adam has just begun some improved production racing in his gay Evo.

Nooooo Russ..... loved following your progress through the high and lows over the years ;)

Richo, make sure you kick my mates supra from gorilla industries :P

Already did last year :P

I'll be looking to be much faster than last year.

Got my confirmation yesterday :banana:

Shame that some of the season campaigners cant make it....

However, there seems to be some insane builds coming through in the motorsports section

3 x R32 GTRS that I've been getting excited about...

Ex BSM (John I think)

BC Auotmotive (Steve is it?)

Ex Willal (Dahn?)

Haven't met you lads in person but i look forward to it....

glad we can keep the EVO's honest

:cheers:

Steve

Got my confirmation yesterday :banana:

Shame that some of the season campaigners cant make it....

However, there seems to be some insane builds coming through in the motorsports section

3 x R32 GTRS that I've been getting excited about...

Ex BSM (John I think)

BC Auotmotive (Steve is it?)

Ex Willal (Dahn?)

Haven't met you lads in person but i look forward to it....

glad we can keep the EVO's honest

:cheers:

Steve

Awesome...more RB racers for the event!

Yes it's Danh and I am in as well.

Looking forward to catch up with you guys and good luck with the preparation :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...