Jump to content
SAU Community

Recommended Posts

News.com.au article:

http://www.news.com....z-1226554833139

The end in sight for Falcons and Commodores - sources estimate from 2016

Would be sad to see no more Commodores and Falcons on the road because of the heritage they have going back such a long time, and I grew up during the beginning of that era of Commodores versus Falcons; after all the Kingswoods and Toranas.

But the writing was on the wall. Year after year of Large segment decline (in the local market at least). Everyone moving to SUVs and small/medium sized cars.

What do you reckon? Will anyone else miss them besides the die-hard V8 supercar fans? Will they make a comeback in another 20 years? Do they deserve to?

ssv.png

falcon_main,0.jpg

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

Yeah I can see HSV pulling out a few 'final series' as production finishes up on the VF. Could indeed be worth something if they make a more bespoke HSV model, like the W427, HRT 427, 1995 GTS-R, etc

My usual email group (about 20 or so mates), this has been one of the main topics of discussion for the day (a good 200-300 emails)...

Labour rates are up so high now it's just not economical to manufacture in this country any more across many industries. Wonder where the Unions will be, having priced their own members out of jobs, probably nowhere.

Of course that is partly because of spiralling bills and costs of living, then add in other factors, so it is but one piece of a much bigger failing puzzle that the Gov't just aren't addressing or simply don't want too given it's tough decision (read: unpopular) time and has been for a while.

So overall not a surprising move at all really. Expect to see Toyota do the same thing and make an announcement in the next 12 months or so once they've evaluated their positions now the two major players are effectively throwing in the towel.

A sad day indeed as I hear from a source that's seen the new/updated models, will be announced shortly from Holden, are very amazing to look at over the VE.

My usual email group (about 20 or so mates), this has been one of the main topics of discussion for the day (a good 200-300 emails)...

Labour rates are up so high now it's just not economical to manufacture in this country any more across many industries. Wonder where the Unions will be, having priced their own members out of jobs, probably nowhere.

Of course that is partly because of spiralling bills and costs of living, then add in other factors, so it is but one piece of a much bigger failing puzzle that the Gov't just aren't addressing or simply don't want too given it's tough decision (read: unpopular) time and has been for a while.

So overall not a surprising move at all really. Expect to see Toyota do the same thing and make an announcement in the next 12 months or so once they've evaluated their positions now the two major players are effectively throwing in the towel.

A sad day indeed as I hear from a source that's seen the new/updated models, will be announced shortly from Holden, are very amazing to look at over the VE.

The local market has also been protected for such a long time by tariffs on imported cars. Do you think we'll actually see the prices of imported vehicles get "corrected" if the LM auto industry dies off?

Interesting you say that about Toyota; some in the industry are talking about how Toyota is considering a third model line for Altona (in addition to Camry and Aurion). Possibly the RAV4 or Corolla, as they have capacity for it, and the next-gen (petrol) RAV4 shares the Camry's engine anyway.

Toyota's doing well at the moment, but as the revenue for all the parts suppliers here in Aus goes out the window with the imminent demise of the Falcadore, this would surely mean parts prices going skywards and production costs following suit if they continue to build here. The likes of Toyota already have problems trying to stave off the parallel part and counterfeit-parts industry; that problem will get much worse with fewer players in the game and OEM parts therefore becoming more expensive to produce through reduced economies of scale.

Oh well, never liked either of them. Mainly because of the wankers that drive them.

Toyota is doing very well at the moment, at least my dealership turns over a shit load of cars per month consistently i can't us slowing down anytime soon.

The local market has also been protected for such a long time by tariffs on imported cars. Do you think we'll actually see the prices of imported vehicles get "corrected" if the LM auto industry dies off?

Interesting you say that about Toyota; some in the industry are talking about how Toyota is considering a third model line for Altona (in addition to Camry and Aurion). Possibly the RAV4 or Corolla, as they have capacity for it, and the next-gen (petrol) RAV4 shares the Camry's engine anyway.

Toyota's doing well at the moment, but as the revenue for all the parts suppliers here in Aus goes out the window with the imminent demise of the Falcadore, this would surely mean parts prices going skywards and production costs following suit if they continue to build here. The likes of Toyota already have problems trying to stave off the parallel part and counterfeit-parts industry; that problem will get much worse with fewer players in the game and OEM parts therefore becoming more expensive to produce through reduced economies of scale.

Has the increase of the Aussie dollar seen the prices drop?

A 200k car should cost around 20k less than it did 18 months ago... Of course not once dollar of that saving has been passed on :)

So it will be interesting to see but it's long term and won't occur until well into 2020, but you would think so if the LM does die off a little.

Then by the same stroke (as a mate pointed out) Audi and some other manufacturers have dropped prices quite noticeably and you are getting quite a bit for 80k currently where you were not 18 months ago. Perhaps this is where the shift is currently in price bracket terms.

It would be interesting to see if Toyota do expand or go the other way, logic would suggest on a cost basis - the other way.

I will miss them as a cheap high performance sedan (xr6t mainly) Will probably buy a HSV or FPV before they die out.

Non of the current sedans from the main Jap makers interest me in the slightest besides some super expensive ones like Lexus LSF

Edited by Mayuri Krab

It will be bad for the economy, imagine the flow on effects. Such as local component suppliers.

Maybe big cars with smaller turbo petrol or diesel engines should be the solution.

early 1980s...

I do remember a time when Kingswoods downsized to Commodores - VC I think - due to oil embargos.

They streaked ahead in sales whilst "X" series Falcons like 'whales', wallowed.

Over the years...

Camrys upsized, Corollas upsized, 3 series Mazdas upsized, Maximas upsized... > in fact about everything has upsized.

So once again - probably through necessity - does Holden dare to...???

2015...

Methinks not, whilst energy sources for cars have gone down different directions

It will be bad for the economy, imagine the flow on effects. Such as local component suppliers.

Maybe big cars with smaller turbo petrol or diesel engines should be the solution.

Yeah Mark I don't see it being a good thing in the short term as far as jobs are concerned anyway. Won't make our GDP and exports look that great if that part of the industry goes as well (which would seem inevitable). But there is so much $$$ being thrown at the Aussie car industry by the govt that surely those millions could be directed to more... sustainable industries. At the moment it is like trying to flog a dead horse.

And as for big car / small/efficient engine?

See this article and many others. The Falcon EcoBoost is supposed to be quite a good machine. Pity that after a year on sale barely anyone is buying them.

Holden and HSV were working on liquid-injection LPG for a while now, not sure if it is ever coming to market in decent numbers but the on-paper figures were impressive. Significant fuel saving coupled with a slight performance *gain*.

Has the increase of the Aussie dollar seen the prices drop?

A 200k car should cost around 20k less than it did 18 months ago... Of course not once dollar of that saving has been passed on :)

So it will be interesting to see but it's long term and won't occur until well into 2020, but you would think so if the LM does die off a little.

Then by the same stroke (as a mate pointed out) Audi and some other manufacturers have dropped prices quite noticeably and you are getting quite a bit for 80k currently where you were not 18 months ago. Perhaps this is where the shift is currently in price bracket terms.

It would be interesting to see if Toyota do expand or go the other way, logic would suggest on a cost basis - the other way.

Yeah I remember seeing that a few premium mfrs were passing on the Aussie dollar benefit.

Are we as a country becoming bigger brand snobs? Of course your euro car is going to feel better put together than a Falcadore and boast better tech, but in terms of bang for your buck and features; while you might be getting a lot of Audi for your $80K, you'd be getting a lot more mumbo and occupant space with a Senator of equivalent price.

My usual email group (about 20 or so mates), this has been one of the main topics of discussion for the day (a good 200-300 emails)...

Labour rates are up so high now it's just not economical to manufacture in this country any more across many industries. Wonder where the Unions will be, having priced their own members out of jobs, probably nowhere.

Of course that is partly because of spiralling bills and costs of living, then add in other factors, so it is but one piece of a much bigger failing puzzle that the Gov't just aren't addressing or simply don't want too given it's tough decision (read: unpopular) time and has been for a while.

So overall not a surprising move at all really. Expect to see Toyota do the same thing and make an announcement in the next 12 months or so once they've evaluated their positions now the two major players are effectively throwing in the towel.

A sad day indeed as I hear from a source that's seen the new/updated models, will be announced shortly from Holden, are very amazing to look at over the VE.

Just_For_Lulz_by_OmegaTexnos_zpsde12764d.jpg

It isn't the unions fault and if the government is running the country so badly why is the economy doing so well. Would you prefer it if Australia was more like America where there is a class of working poor and the major auto manufacturers required massive bail outs from the government just to keep them soluble or even worse disappear completely like Pontiac.

OT I will believe the end for Commodores and Falcons has come when I go to the respective websites and they aren't available for sale anymore. Those cars have been through a massive worldwide economic crisis and the Falcon made it through the energy crisis. The article seems to have a fair bit of hearsay in it. Will wait and see.

Edited by *LOACH*

early 1980s...

I do remember a time when Kingswoods downsized to Commodores - VC I think - due to oil embargos.

They streaked ahead in sales whilst "X" series Falcons like 'whales', wallowed.

Over the years...

Camrys upsized, Corollas upsized, 3 series Mazdas upsized, Maximas upsized... > in fact about everything has upsized.

So once again - probably through necessity - does Holden dare to...???

2015...

Methinks not, whilst energy sources for cars have gone down different directions

VB Commodore, yeah Holden_VB_commodore_01.jpg

(OT, I love how there's also a VP and a VK in the driveway :))

I remember reading that the VB wasn't well received at first because we loved our big sedans like the XA-XC so much.

I reckon the VE series is huge on the road with the flared wheel arches and high waistline rising to a very high boot. It's a great looking car but it was a massive size increase over the VZ. Size wise I prefer the VZ ute over the VE. I think the VF will be a similar size to the VE. It's supposed to make use of aluminium in the body to reduce weight and they are consolidating the model line to decrease complexity in production and increase quality.

Holden are putting a fair bit behind their new Volt but like many alternative-fuel offerings they seem to take a ton of marketing $$ to finally get people into them and trusting that they won't explode if you look at them sideways

Edited by God_speed

a few months ago i was having a coffee with an engineer from holden who had been working on the replacement for the VE commodore. he didn't give much away, lol.

it will be a sad day for the average family car buyer if the commodore and falcon are scrapped. but i doubt it will be that simple. they will simply be replaced by an overseas model (from the states). there has already been plenty of speculation over the past 5 or 6 years about the falcon being expected to be replaced by a fwd model (such as the taurus). i know that i've got MOTOR magazines that are quite a few years old that have articles about it. i'm pretty sure the last one i bought had it in there and i haven't bought a car mag in at least 3 years.

large family cars will always have an advantage over SUVs, given that to get a SUV with the same space as a family car will cost a lot more, and all general running costs will be higher with the SUV, from fuel economy to tyres.

sure you can get euro cars cheaper these days, but they would still be more expensive than a base model commodore or falcon. and down the track, once they start to get up in mileage, i'd prefer the commodore or falcon. they are pretty trouble free even with high mileage. my VT just ticked over 260,000kms last week and i've put 60,000kms on it in the past 2 years without issue.

a few months ago i was having a coffee with an engineer from holden who had been working on the replacement for the VE commodore. he didn't give much away, lol.

it will be a sad day for the average family car buyer if the commodore and falcon are scrapped. but i doubt it will be that simple. they will simply be replaced by an overseas model (from the states). there has already been plenty of speculation over the past 5 or 6 years about the falcon being expected to be replaced by a fwd model (such as the taurus). i know that i've got MOTOR magazines that are quite a few years old that have articles about it. i'm pretty sure the last one i bought had it in there and i haven't bought a car mag in at least 3 years.

large family cars will always have an advantage over SUVs, given that to get a SUV with the same space as a family car will cost a lot more, and all general running costs will be higher with the SUV, from fuel economy to tyres.

sure you can get euro cars cheaper these days, but they would still be more expensive than a base model commodore or falcon. and down the track, once they start to get up in mileage, i'd prefer the commodore or falcon. they are pretty trouble free even with high mileage. my VT just ticked over 260,000kms last week and i've put 60,000kms on it in the past 2 years without issue.

Yeah the idea of the Taurus replacing the Falcon has been with us for a long time. The first Taurus they tried to push to Aussies was that dog ugly thing that didn't have a single straight line anywhere on the body, back in the mid 90s. The new Taurus looks alright, is supposedly not a bad steer and I believe will also be available with AWD on some grades.

Those who need to tow will buy an SUV

I think you're right about SUVs being more expensive to run; not necessarily to buy though... Being classed by FCAI as commercial vehicles, the imported ones are exempt from the higher tariffs applied to other imported vehicles.

Commodore and Falcon might be a bit like a security blanket or your first toy as a kid - they have sentimental value to Aussies and we might bemoan the loss of them in the short term, but would we really be worse off without them? We clearly aren't buying enough of them, so it would appear not.

when i was saying that they are more expensive to buy, i was comparing vehicles of similar size. so to get a SUV with the same space inside as a commodore or falcon you would be up the price range a bit as you would be looking at things like a landcruiser or patrol, etc. where base models are more expensive than a base model commodore or falcon by a reasonable amount (at least the last time i looked, which i will admit is a little while ago, so things might've changed a bit). and they are also less practical in a day to day basis. things like parking in a shopping centre, etc.

i think the biggest loss will be the lack of utes in the range. sure, the general ute owner can be a bit of a bogan these days, but the utes themselves are good. you get the practicality of the ute with the comfort and drive of a family sedan (and the performance).

Yep. Aussie cars (Aurion, Commodore, Falcon) offer excellent performance per dollar. New vs. New, in the same price bracket. No Japanese car or Euro car can match an Aussie car for engine performance and kit. The only thing missing from Holden and Ford is the perceived quality. If Toyota Australia can do it, why are Ford and Holden behind?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...