Jump to content
SAU Community

Recommended Posts

hey guys were looking for people to help out at the event

Volunteers are still required for this Friday's Mega Meet. If you're free and willing to lend a hand, please assemble at 4:00pm onwards at the staging lanes.

  • Replies 249
  • Created
  • Last Reply

Top Posters In This Topic

It's not really a show, it's more a gathering than anything else.

Good basis to start a petition then!

Thoughts of what a petition should be about Nick? dB of all exhausts to be allowed up to Murcielagos at 9000rpm?

hey guys were looking for people to help out at the event

Volunteers are still required for this Friday's Mega Meet. If you're free and willing to lend a hand, please assemble at 4:00pm onwards at the staging lanes.

Hey Braden,

Is that to help out the Top Secret boys or to help organise SAU stuff? I'm taking Friday off now so good possiblility I can help out but would need to get the SAU stand stuff sorted as well.

Good basis to start a petition then!

Thoughts of what a petition should be about Nick? dB of all exhausts to be allowed up to Murcielagos at 9000rpm Harleys sound...?

Then i could run gate 24/7 with no complaints :domokun:

Hey Braden,

Is that to help out the Top Secret boys or to help organise SAU stuff? I'm taking Friday off now so good possiblility I can help out but would need to get the SAU stand stuff sorted as well.

Hey Eric I got a message from the top secret guys on face book asking for some people if you need a hand im more then will to help you ive got Friday off and dont want to waste it

Yup, SAU NSW will have a trade stand there. Find us with a cabana and big banner that says "Skylines Australia NSW".



You'll also find my car there - White R33 GTR with black accents (kinda hard to miss now) :D


Cant wait to see all the complaints once the defects are handed out. You thought that the top gear turn out of 24 cop cars was bad, expect more when they hear off all the high performance imports having a big meet. My baby will be safe at home.

To be honest, I don't think there will be a problem. I have been to sizeable meets organised by these people in the past. They have a good working relationship with the local police.

I have seen the police at their events before, but there were no issues. Just a presence. And there will be a presence tonight too.

Bt I'm prepared to be wrong!

If you act like a dick, you deserve everything you get IMO.

Cant wait to see all the complaints once the defects are handed out. You thought that the top gear turn out of 24 cop cars was bad, expect more when they hear off all the high performance imports having a big meet. My baby will be safe at home.

If you act like a dick, you deserve everything you get IMO.

Absolutely!

I would go but the car just isnt up to scratch so will enjoy lots of photos in the wrap up thread :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...