Jump to content
SAU Community

Recommended Posts

I wouldn't think so.

My experience is a tune from scratch is over $1k and a retune around $400

I haven't used Autotech but pick up the phone and call them. (25c) :)

Jez on the central coast is good with Nistune's and I beleive reasonable on price

I was more than happy with the nistuning autotech did on my sr20det 1600. I got PLMS to supply the nistune with a base map loaded to suit my injectors/AFM/turbo, and got autotech to do the fine tuning. From memory it was around the $400-$500 mark and netted 220rwkw @ 14psi with drivability of a factory ecu.

Also had Nistune installed and tune by Ed at Autotech. Car has done many track days and hasn't skipped a beat 215rwkw (Silvia SR20DET)

Unless your going monster power is more than adequate.

He is very expensive but still cheaper than dragging your car to Sydney to get it done.

I was more than happy with the nistuning autotech did on my sr20det 1600. I got PLMS to supply the nistune with a base map loaded to suit my injectors/AFM/turbo, and got autotech to do the fine tuning. From memory it was around the $400-$500 mark and netted 220rwkw @ 14psi with drivability of a factory ecu.

$500 for a tune? thats retune price isnt it?

would 350kw be classified as big power?

on a GTR

Edited by AnDreeZy

That's roughly what I've paid for every tune I've had done there, all have been retunes I.e. change supercharger to turbo, install bigger turbo and cams, fuel system upgrade. I guess the nistune was a retune as I was driving it for months on the base map no worries.

For my GTR i was quoted $1200 to re chip and nistune the ECU from autotech. $500 for a re tune if usually what you will pay.


$500 for a tune? thats retune price isnt it?
would 350kw be classified as big power?
on a GTR

I wouldn't classify it as "Big" power but it's a lot none the less. You don't really want much more than that for a road car. Unless you are a dyno dummy. But after that you usually have so much lagg/Too much power you lose most of the fun.

350kw on a GTR is effortless and not classified as big power.

I have a lot more than is necessary for a street car but I happen to like drag racing. Mine's also a lot more drivable than you think, you just need to go to some effort to make sure you set things up properly.

not sure how the nis tune thing works - but when it come to tuning you pay for what you get and Ed might be more pricey then others - not much - but he is worth every cent in my opinion - and has great results in a wide range of cars, engines and ecu's-

in my opinion put the extra in and go to him rather then saving a few bucks -

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...