Jump to content
SAU Community

Recommended Posts

Hi guys any advice appreciated!

Bought car with 170000k's, FMIC'd, cheap turbo, bigger radiator, nistune'd ecu, splitfires, swaybars, 2 way diff etc, drove car for 6months without issue, eventually got a small noise which got worse with time and heat, eventually 'blew up' cruising on highway with abnormally high oil temp, massive internal knocking sort of noise from engine, key off & coast to stop, tow truck, home to cry. Engine will start but it sounds that bad you dont even want to put your head near the engine bay. I believe i've spun a bearing in a rod but am unsure?

This car was not babied and I am not suprised something has broken, just after the best way to go about fixing it.

I've purchased an RB25DE NEO for $1350 from an engine import shop in Brisbane in late January (business name withheld atm), I still have the receipt, and have not removed engine from crate it was delivered on.

I asked for an RB25DET NEO and was sent an RB25DE NEO. I only found out today as i had a mate take delivery. They have a 7 day return policy (it took 4 days to get delivered!) and will not take the engine back as he keeps telling me I asked for a non turbo'd engine. This is a complete lie. All he would do is give me $1250 store credit towards a turbo'd RB25DET NEO (for $3000).

What do you guys suggest i do? Is it possible to unbolt sump off both engines and swap crank, rods and pistons after machining? Or should i fix my engine? What parts exactly will need machining? Whats a natro 25 worth from a private seller?

ALL REPLIES GREATLY APPRECIATED! :)

post-95498-0-30236300-1360572393_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/419755-bigendtrouble-help/
Share on other sites

  • 3 months later...

Is it bad form to post on old topics?

Just wanted to get back to sau and say i've successfully put all my turbo gear on the DE and it works really well. Timing had to be pulled and fuel added via nistune due to a knock but otherwise i'm really happy with how its ended up!

I do however still have a small intermitant problem. Randomly sometimes when I stop and idle I get oil smoke out of exhaust, sometimes its a fair bit too and can be fairly embarrassing! Decel in gear seems to make this worse?however sometimes i can compression brake down massive hill and come to a stop and the exhaust is perfectly clear!

Intake side cam cover is the DE one. Is the PCV system different on the DE from the DET? The turbo is new so don't tell me its leaking out the exhaust side!

Thanks for any input guys!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...